OP-TEE configs are enabled by default, change the doc to no longer declare OP-TEE as optional. Further, phycore-imx8mm and imx8mm-phygate-tauri-l use different build instructions, so dissolve the common file for building OP-TEE. While at it, introduce style changes where export commands are no longer used.
Signed-off-by: Yannic Moog <y.m...@phytec.de> --- board/phytec/phycore_imx8mm/MAINTAINERS | 1 - doc/board/phytec/imx8mm-optee-build.rsti | 14 ---------- doc/board/phytec/imx8mm-phygate-tauri-l.rst | 42 ++++++++++++++++++---------- doc/board/phytec/phycore-imx8mm.rst | 43 +++++++++++++++++++---------- doc/board/phytec/phycore-imx8mp.rst | 41 ++++++++++++++------------- 5 files changed, 79 insertions(+), 62 deletions(-) diff --git a/board/phytec/phycore_imx8mm/MAINTAINERS b/board/phytec/phycore_imx8mm/MAINTAINERS index 7631e1cb331b608335620d0db49104459f673d1d..58c5e2d0af9fe404a5995fecc96cdbaa5845f979 100644 --- a/board/phytec/phycore_imx8mm/MAINTAINERS +++ b/board/phytec/phycore_imx8mm/MAINTAINERS @@ -9,6 +9,5 @@ F: configs/imx8mm-phygate-tauri-l_defconfig F: configs/phycore-imx8mm_defconfig F: doc/board/phytec/imx8mm-phygate-tauri-l.rst F: doc/board/phytec/index.rst -F: doc/board/phytec/imx8mm-optee-build.rsti F: doc/board/phytec/phycore_imx8mm.rst F: include/configs/phycore_imx8mm.h diff --git a/doc/board/phytec/imx8mm-optee-build.rsti b/doc/board/phytec/imx8mm-optee-build.rsti deleted file mode 100644 index c83de5cc7cf4a0229cbd89f4c7d2bfd8448cb735..0000000000000000000000000000000000000000 --- a/doc/board/phytec/imx8mm-optee-build.rsti +++ /dev/null @@ -1,14 +0,0 @@ -Build the OP-TEE binary (optional) ----------------------------------- - -.. code-block:: bash - - $ git clone https://github.com/OP-TEE/optee_os.git - $ cd optee_os - $ make CFG_TEE_BENCHMARK=n \ - CROSS_COMPILE=aarch64-linux-gnu- \ - O=out/arm \ - PLATFORM=imx-mx8mmevk \ - CFG_TZDRAM_START=0x56000000 \ - CFG_DDR_SIZE=0x80000000 \ - CFG_UART_BASE=UART3_BASE diff --git a/doc/board/phytec/imx8mm-phygate-tauri-l.rst b/doc/board/phytec/imx8mm-phygate-tauri-l.rst index 0d9e1024f8c5300e91a3a4c18b2babd5853a0824..4dd82cd9785fa585ed216664a25f593d4e723dbb 100644 --- a/doc/board/phytec/imx8mm-phygate-tauri-l.rst +++ b/doc/board/phytec/imx8mm-phygate-tauri-l.rst @@ -9,7 +9,7 @@ Quick Start ----------- - Build the ARM Trusted firmware binary -- Build the OP-TEE binary (optional) +- Build the OP-TEE binary - Get ddr firmware - Build U-Boot - Boot @@ -21,23 +21,35 @@ Build the ARM Trusted firmware binary $ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git $ cd trusted-firmware-a - $ export CROSS_COMPILE=aarch64-linux-gnu- - $ export IMX_BOOT_UART_BASE=0x30880000 - $ # with optee - $ make PLAT=imx8mm BL32_BASE=0x56000000 SPD=opteed bl31 - $ # without optee - $ make PLAT=imx8mm bl31 + $ make -j $(nproc) \ + CROSS_COMPILE=aarch64-linux-gnu- \ + PLAT=imx8mm \ + IMX_BOOT_UART_BASE=0x30880000 \ + BL32_BASE=0xbe000000 \ + SPD=opteed \ + bl31 -.. include:: imx8mm-optee-build.rsti +Build the OP-TEE binary +----------------------- + +.. code-block:: bash + + $ git clone https://github.com/OP-TEE/optee_os.git + $ cd optee_os + $ make -j $(nproc) \ + CROSS_COMPILE=aarch64-linux-gnu- \ + CFG_TEE_BENCHMARK=n \ + O=out/arm \ + PLATFORM=imx-mx8mm_phygate_tauri_l Get the ddr firmware -------------------- .. code-block:: bash - $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.23.bin - $ chmod +x firmware-imx-8.23.bin - $ ./firmware-imx-8.23.bin + $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.28-994fa14.bin + $ chmod +x firmware-imx-8.28-994fa14.bin + $ ./firmware-imx-8.28-994fa14.bin Build U-Boot for SD card ------------------------ @@ -49,15 +61,17 @@ Copy binaries $ cp <TF-A dir>/build/imx8mm/release/bl31.bin . $ cp <OP-TEE dir>/out/arm/core/tee-raw.bin tee.bin - $ cp firmware-imx-8.23/firmware/ddr/synopsys/lpddr4*.bin . + $ cp firmware-imx-8.28-994fa14/firmware/ddr/synopsys/lpddr4*.bin . Build U-Boot ^^^^^^^^^^^^ .. code-block:: bash - $ make imx8mm-phygate-tauri-l_defconfig - $ make flash.bin + $ make -j $(nproc) + CROSS_COMPILE=aarch64-linux-gnu- \ + imx8mm-phygate-tauri-l_defconfig \ + flash.bin Flash SD card ^^^^^^^^^^^^^ diff --git a/doc/board/phytec/phycore-imx8mm.rst b/doc/board/phytec/phycore-imx8mm.rst index 08f5949e02d8d2bfba71867d93c2b3ed8fdc67e2..d5edbc91474e95f677dd12e5fcc6c16092dea1cd 100644 --- a/doc/board/phytec/phycore-imx8mm.rst +++ b/doc/board/phytec/phycore-imx8mm.rst @@ -9,7 +9,7 @@ Quick Start ----------- - Build the ARM Trusted firmware binary -- Build the OP-TEE binary (optional) +- Build the OP-TEE binary - Get ddr firmware - Build U-Boot - Boot @@ -21,23 +21,35 @@ Build the ARM Trusted firmware binary $ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git $ cd trusted-firmware-a - $ export CROSS_COMPILE=aarch64-linux-gnu- - $ export IMX_BOOT_UART_BASE=0x30880000 - $ # with optee - $ make PLAT=imx8mm BL32_BASE=0x56000000 SPD=opteed bl31 - $ # without optee - $ make PLAT=imx8mm bl31 + $ make -j $(nproc) \ + CROSS_COMPILE=aarch64-linux-gnu- \ + PLAT=imx8mm \ + IMX_BOOT_UART_BASE=0x30880000 \ + BL32_BASE=0x7e000000 \ + SPD=opteed \ + bl31 -.. include:: imx8mm-optee-build.rsti +Build the OP-TEE binary +----------------------- + +.. code-block:: bash + + $ git clone https://github.com/OP-TEE/optee_os.git + $ cd optee_os + $ make -j $(nproc) \ + CROSS_COMPILE=aarch64-linux-gnu- \ + CFG_TEE_BENCHMARK=n \ + O=out/arm \ + PLATFORM=imx-mx8mm_phyboard_polis Get the ddr firmware -------------------- .. code-block:: bash - $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.19.bin - $ chmod +x firmware-imx-8.19.bin - $ ./firmware-imx-8.19.bin + $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.28-994fa14.bin + $ chmod +x firmware-imx-8.28-994fa14.bin + $ ./firmware-imx-8.28-994fa14.bin Build U-Boot for SD card ------------------------ @@ -48,15 +60,18 @@ Copy binaries .. code-block:: bash $ cp <TF-A dir>/build/imx8mm/release/bl31.bin . - $ cp firmware-imx-8.19/firmware/ddr/synopsys/lpddr4*.bin . + $ cp <OP-TEE dir>/out/arm/core/tee-raw.bin tee.bin + $ cp firmware-imx-8.28-994fa14/firmware/ddr/synopsys/lpddr4*.bin . Build U-Boot ^^^^^^^^^^^^ .. code-block:: bash - $ make phycore-imx8mm_defconfig - $ make flash.bin + $ make -j $(nproc) \ + CROSS_COMPILE=aarch64-linux-gnu- \ + phycore-imx8mm_defconfig \ + flash.bin Flash SD card ^^^^^^^^^^^^^ diff --git a/doc/board/phytec/phycore-imx8mp.rst b/doc/board/phytec/phycore-imx8mp.rst index 50be99126537a2dc5323bd49c1513b196182c5f3..cea3a2835e69d6c6d3aa4c16698aebd09f73bf49 100644 --- a/doc/board/phytec/phycore-imx8mp.rst +++ b/doc/board/phytec/phycore-imx8mp.rst @@ -3,13 +3,13 @@ phyCORE-i.MX 8M Plus ==================== -The phyCORE-i.MX 8M Plus with 2GB of main memory is supported. +The phyCORE-i.MX 8M Plus with 1,2,4GB of main memory is supported. Quick Start ----------- - Build the ARM Trusted firmware binary -- Build the OP-TEE binary (optional) +- Build the OP-TEE binary - Get ddr firmware - Build U-Boot - Boot @@ -21,12 +21,13 @@ Build the ARM Trusted firmware binary $ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git $ cd trusted-firmware-a - $ export CROSS_COMPILE=aarch64-linux-gnu- - $ export IMX_BOOT_UART_BASE=0x30860000 - $ # with optee - $ make PLAT=imx8mp SPD=opteed bl31 - $ # without optee - $ make PLAT=imx8mp bl31 + $ make -j $(nproc) \ + CROSS_COMPILE=aarch64-linux-gnu- \ + PLAT=imx8mp \ + IMX_BOOT_UART_BASE=0x30860000 \ + BL32_BASE=0x7e000000 \ + SPD=opteed \ + bl31 Build the OP-TEE binary (optional) ---------------------------------- @@ -35,20 +36,20 @@ Build the OP-TEE binary (optional) $ git clone https://github.com/OP-TEE/optee_os.git $ cd optee_os - $ make CFG_TEE_BENCHMARK=n \ - CROSS_COMPILE=aarch64-linux-gnu- \ - O=out/arm \ - PLATFORM=imx-mx8mp_phyboard_pollux \ - CFG_TZDRAM_START=0x56000000 + $ make -j $(nproc) \ + CROSS_COMPILE=aarch64-linux-gnu- \ + CFG_TEE_BENCHMARK=n \ + O=out/arm \ + PLATFORM=imx-mx8mp_phyboard_pollux Get the ddr firmware -------------------- .. code-block:: bash - $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.19.bin - $ chmod +x firmware-imx-8.19.bin - $ ./firmware-imx-8.19.bin + $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.28-994fa14.bin + $ chmod +x firmware-imx-8.28-994fa14.bin + $ ./firmware-imx-8.28-994fa14.bin Build U-Boot for SD card ------------------------ @@ -60,15 +61,17 @@ Copy binaries $ cp <TF-A dir>/build/imx8mp/release/bl31.bin . $ cp <OP-TEE dir>/out/arm/core/tee-raw.bin tee.bin - $ cp firmware-imx-8.19/firmware/ddr/synopsys/lpddr4*.bin . + $ cp firmware-imx-8.28-994fa14/firmware/ddr/synopsys/lpddr4*.bin . Build U-Boot ^^^^^^^^^^^^ .. code-block:: bash - $ make phycore-imx8mp_defconfig - $ make flash.bin + $ make -j $(nproc) \ + CROSS_COMPILE=aarch64-linux-gnu- \ + phycore-imx8mp_defconfig \ + flash.bin Flash SD card ^^^^^^^^^^^^^ -- 2.43.0
