On Wed, 7 May 2025 at 02:32, Andre Przywara <andre.przyw...@arm.com> wrote: > > Hi, > > this series enables the build of the AXP driver in U-Boot proper for all > boards using the Allwinner A64 SoC. So far some static PMIC rail setup > was done by TF-A, but this was rather static (enabling too many) and > increases the code size of the rather limited BL31 build. > > Do this for the A64 only first, since this uses RSB consistently, while > the H6 boards are undergoing a transition to use I2C. > > Please have a look and test!
For the series: Reviewed-by: Peter Robinson <pbrobin...@gmail.com> Tested-by: Peter Robinson <pbrobin...@gmail.com> Tested on a Pine64+, I enabled CMD_PMIC and CMD_REGULATOR and could see all the expected details as well as in the output in 'dm tree' and it boots and runs as expected with Fedora 43. Peter > Cheers, > Andre > > Andre Przywara (2): > sunxi: A64: enable DRIVEVBUS support for respective boards > sunxi: A64: enable AXP drivers > > arch/arm/Kconfig | 1 + > arch/arm/mach-sunxi/Kconfig | 3 +++ > configs/a64-olinuxino-emmc_defconfig | 1 + > configs/a64-olinuxino_defconfig | 1 + > configs/amarula_a64_relic_defconfig | 1 + > configs/bananapi_m64_defconfig | 1 + > configs/orangepi_win_defconfig | 1 + > configs/pinetab_defconfig | 1 + > 8 files changed, 10 insertions(+) > > -- > 2.46.3 >
