On 2025/7/22 06:07, Jonas Karlman wrote:
Generic PHY reference counting helps ensure driver ops for init/exit and
power on/off are called at correct state. For this to work the PHY
driver must initialize PHY-id to a persistent value in of_xlate ops.

The Rockchip USBDP PHY driver does not initialize the PHY-id field, this
typically lead to use of unshared reference counting among different
struct phy instances.

Initialize the PHY-id in of_xlate ops to ensure use of shared reference
counting among all struct phy instances.

E.g. on a ROCK 5B following could be observed:

   => usb start
   starting USB...
   [...]
   Bus usb@fc400000: 2 USB Device(s) found
          scanning usb for storage devices... 1 Storage Device(s) found

   => usb reset
   resetting USB...
   [...]
   rockchip_udphy phy@fed90000: cmn ana lcpll lock timeout
   rockchip_udphy phy@fed90000: failed to init usbdp combophy
   rockchip_udphy phy@fed90000: PHY: Failed to init phy@fed90000: -110.
   Can't init PHY1
   Bus usb@fc400000: probe failed, error -110
          scanning usb for storage devices... 0 Storage Device(s) found

With shared reference counting this is fixed:

   => usb reset
   resetting USB...
   [...]
   Bus usb@fc400000: 2 USB Device(s) found
          scanning usb for storage devices... 1 Storage Device(s) found

Signed-off-by: Jonas Karlman <jo...@kwiboo.se>
Reviewed-by: Kever Yang <kever.y...@rock-chips.com>

Thanks,
- Kever
---
  drivers/phy/rockchip/phy-rockchip-usbdp.c | 4 ++++
  1 file changed, 4 insertions(+)

diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c 
b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index 9deec47ae462..56963c87183e 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -587,12 +587,16 @@ static int udphy_power_off(struct rockchip_udphy *udphy, 
u8 mode)
  static int rockchip_u3phy_of_xlate(struct phy *phy,
                                   struct ofnode_phandle_args *args)
  {
+       struct rockchip_udphy *udphy = dev_get_priv(phy->dev);
+
        if (args->args_count == 0)
                return -EINVAL;
if (args->args[0] != PHY_TYPE_USB3)
                return -EINVAL;
+ phy->id = udphy->id;
+
        return 0;
  }

Reply via email to