On Tue, 10 Jun 2025 07:38:55 +0200 Lukas Schmid <[email protected]> wrote:
Hi Lukas, > NetCube Systems Kumquat is a board based on the Allwinner V3s SoC, > including: > > - 64MB DDR2 included in SoC > - 10/100 Mbps Ethernet > - USB-C DRD > - Audio Codec > - Isolated CAN-FD > - ESP32 over SDIO > - 8MB SPI-NOR Flash for bootloader > - I2C EEPROM for MAC addresses > - SDIO Connector for eMMC or SD-Card > - 8x 12/24V IOs, 4x normally open relays > - DS3232 RTC with Battery Backup > - QWIIC connectors for external I2C devices > > Signed-off-by: Lukas Schmid <[email protected]> > --- > configs/netcube_kumquat_defconfig | 45 +++++++++++++++++++++++++++++++ > 1 file changed, 45 insertions(+) > create mode 100644 configs/netcube_kumquat_defconfig > > diff --git a/configs/netcube_kumquat_defconfig > b/configs/netcube_kumquat_defconfig > new file mode 100644 > index 00000000..cfe331cb > --- /dev/null > +++ b/configs/netcube_kumquat_defconfig > @@ -0,0 +1,45 @@ > +CONFIG_ARM=y > +CONFIG_ARCH_SUNXI=y > +CONFIG_SF_DEFAULT_SPEED=40000000 > +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun8i-v3s-netcube-kumquat" > +CONFIG_SPL=y > +CONFIG_MACH_SUN8I_V3S=y > +CONFIG_DRAM_CLK=360 This line is redundant, since it's the default. I would be removed by a savedefconfig sync anyway. > +CONFIG_SPL_SPI_SUNXI=y > +# CONFIG_HAS_ARMV7_SECURE_BASE is not set > +# CONFIG_TIMESTAMP is not set > +CONFIG_BOOTDELAY=1 > +CONFIG_PREBOOT="" > +# CONFIG_SYS_DEVICE_NULLDEV is not set > +CONFIG_SPL_MTD=y > +CONFIG_SYS_PROMPT="Kumquat> " > +CONFIG_CMD_EEPROM=y > +CONFIG_CMD_I2C=y > +CONFIG_CMD_MTD=y > +CONFIG_MTDIDS_DEFAULT="nor0=firmware" > +CONFIG_MTDPARTS_DEFAULT="mtdparts=firmware:960k(u-boot)ro,64k(u-boot-env),-(user)" > +CONFIG_CMD_DIAG=y > +CONFIG_OF_UPSTREAM=y This one is now redundant as well, as all V3 devices are now using the DT rebasing repo DTs. Since the rest looks fine, I just removed those lines and queued it for the next PR. For the records: Reviewed-by: Andre Przywara <[email protected]> Thanks, Andre > +# CONFIG_ENV_IS_IN_FAT is not set > +CONFIG_ENV_SPI_MAX_HZ=1000000 > +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y > +CONFIG_USE_HOSTNAME=y > +CONFIG_HOSTNAME="kumquat" > +CONFIG_VERSION_VARIABLE=y > +# CONFIG_USB_FUNCTION_FASTBOOT is not set > +CONFIG_SYS_I2C_MVTWSI=y > +CONFIG_MISC=y > +CONFIG_NVMEM=y > +CONFIG_I2C_EEPROM=y > +CONFIG_SYS_I2C_EEPROM_ADDR=0x50 > +CONFIG_MTD=y > +CONFIG_SPI_FLASH_WINBOND=y > +CONFIG_SPI_FLASH_MTD=y > +CONFIG_SUN8I_EMAC=y > +CONFIG_PHY_SUN4I_USB=y > +CONFIG_DM_RTC=y > +CONFIG_RTC_DS3232=y > +CONFIG_SPI=y > +CONFIG_USB_MUSB_HOST=y > +CONFIG_USB_MUSB_GADGET=y > +# CONFIG_USB_ETHER is not set
