On 2025/9/1 00:49, Jonas Karlman wrote:
Enable the default commands and some more useful commands that can be useful to determin the state of the board from U-Boot CLI. Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]> Thanks, - Kever
--- v2: No change --- configs/odroid-go2_defconfig | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/configs/odroid-go2_defconfig b/configs/odroid-go2_defconfig index 70d74c65a2f3..512ffefc70f6 100644 --- a/configs/odroid-go2_defconfig +++ b/configs/odroid-go2_defconfig @@ -42,22 +42,21 @@ CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 CONFIG_SPL_ATF=y # CONFIG_TPL_FRAMEWORK is not set # CONFIG_TPL_BANNER_PRINT is not set -# CONFIG_CMD_BOOTD is not set -# CONFIG_CMD_ELF is not set -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_XIMG is not set -# CONFIG_CMD_LZMADEC is not set -# CONFIG_CMD_UNZIP is not set +CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMINFO_MAP=y +CONFIG_CMD_ADC=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_PWM=y CONFIG_CMD_GPT=y -# CONFIG_CMD_LOADB is not set -# CONFIG_CMD_LOADS is not set +CONFIG_CMD_I2C=y +CONFIG_CMD_MISC=y CONFIG_CMD_MMC=y CONFIG_CMD_POWEROFF=y CONFIG_CMD_USB=y CONFIG_CMD_ROCKUSB=y CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_ITEST is not set -# CONFIG_CMD_SLEEP is not set +CONFIG_CMD_RNG=y +CONFIG_CMD_REGULATOR=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_ISO_PARTITION is not set CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64
-- Thanks & Best regards, Kever Yang ************************************************************************************************** 杨凯 市场部 Kever Yang Marketing Department 瑞芯微电子股份有限公司 Rockchip Electronics Co.，Ltd。 地址：福建省福州市铜盘路软件大道89号软件园A区18号楼 (350003) Addr : No.18 Building，A District，No.89，Fuzhou Software Boulevard，Fuzhou，Fujian，PRC
