Remove register macros for registers which are not used by this driver. This makes it easier to get an overview of which registers are really used by the driver. No functional change.
Signed-off-by: Marek Vasut <[email protected]> --- Cc: Hai Pham <[email protected]> Cc: Huy Bui <[email protected]> Cc: Nobuhiro Iwamatsu <[email protected]> Cc: Tom Rini <[email protected]> Cc: [email protected] --- drivers/gpio/gpio-rcar.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c index 109383e83d5..8853187e64e 100644 --- a/drivers/gpio/gpio-rcar.c +++ b/drivers/gpio/gpio-rcar.c @@ -19,14 +19,7 @@ #define GPIO_INOUTSEL 0x04 /* General Input/Output Switching Register */ #define GPIO_OUTDT 0x08 /* General Output Register */ #define GPIO_INDT 0x0c /* General Input Register */ -#define GPIO_INTDT 0x10 /* Interrupt Display Register */ -#define GPIO_INTCLR 0x14 /* Interrupt Clear Register */ -#define GPIO_INTMSK 0x18 /* Interrupt Mask Register */ -#define GPIO_MSKCLR 0x1c /* Interrupt Mask Clear Register */ #define GPIO_POSNEG 0x20 /* Positive/Negative Logic Select Register */ -#define GPIO_EDGLEVEL 0x24 /* Edge/level Select Register */ -#define GPIO_FILONOFF 0x28 /* Chattering Prevention On/Off Register */ -#define GPIO_BOTHEDGE 0x4c /* One Edge/Both Edge Select Register */ #define GPIO_INEN 0x50 /* General Input Enable Register */ #define RCAR_MAX_GPIO_PER_BANK 32 -- 2.51.0
