On Thu, 6 Nov 2025 12:23:29 -0600 Tom Rini <[email protected]> wrote:
> On Thu, Nov 06, 2025 at 07:00:01PM +0100, Kory Maincent wrote: > > On Tue, 4 Nov 2025 10:38:16 -0600 > > Tom Rini <[email protected]> wrote: > > > > Other question: Is it possible to not add the environment to SPL image using > > the new text environment format. I have tried to update am335_evm board to > > it but I got a SPL too big error. > > I have tried to add "#if !defined(XPL_BUILD)" but it is not working. > > It seems the same generated environment file is used for all images. > > I still haven't found were it is included in the build of the SPL image. > > It shouldn't change the environment size, but also environment is likely > being pulled in to SPL for network boot support which does require > environment. What do you mean by "same generated environment file is > used for all images" ? And are you building in separate object > directories for a given board or is it not being re-generated on config > changes? Or did I misunderstand? Thanks. Sorry if I was not clear. For the am335x_evm most of the environment is only in the main u-boot image (i.e. not an xPL image). https://elixir.bootlin.com/u-boot/v2025.10/source/include/configs/am335x_evm.h#L78 I would like to do the same but with the new text environment format. Is it possible? Something like: board/ti/am335x/am335x.env for main image and board/ti/am335x/spl_am335x.env for SPL image. If that is not the case could you point me where the change need to happen to help me on that. I didn't find yet where the text environment is pulled into the images. Regards, -- Köry Maincent, Bootlin Embedded Linux and kernel engineering https://bootlin.com
