Remove obsolete properties "u-boot, u-boot-led" and "u-boot,error-led" from stm32mp157c-ed1-scmi-u-boot.dtsi.
Remove led-red and led-blue nodes which are available in kernel DT. See kernel series: https://patchwork.kernel.org/project/linux-arm-kernel/list/?series=1022570 Signed-off-by: Patrice Chotard <[email protected]> --- arch/arm/dts/stm32mp157c-ed1-scmi-u-boot.dtsi | 14 -------------- 1 file changed, 14 deletions(-) diff --git a/arch/arm/dts/stm32mp157c-ed1-scmi-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ed1-scmi-u-boot.dtsi index a0f034b008e..ca1342b80f9 100644 --- a/arch/arm/dts/stm32mp157c-ed1-scmi-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157c-ed1-scmi-u-boot.dtsi @@ -12,8 +12,6 @@ }; config { - u-boot,boot-led = "led-blue"; - u-boot,error-led = "led-red"; u-boot,mmc-env-partition = "u-boot-env"; }; @@ -32,18 +30,6 @@ gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; }; }; - - led { - compatible = "gpio-leds"; - - led-blue { - gpios = <&gpiod 9 GPIO_ACTIVE_HIGH>; - }; - - led-red { - gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; - }; - }; }; &uart4_pins_a { -- 2.43.0
