When this platform was removed the config header file was missed. Remove
that now.
Fixes: ddfc00400965 ("arm: Remove xpress board")
Signed-off-by: Tom Rini <[email protected]>
---
include/configs/xpress.h | 86 ----------------------------------------
1 file changed, 86 deletions(-)
delete mode 100644 include/configs/xpress.h
diff --git a/include/configs/xpress.h b/include/configs/xpress.h
deleted file mode 100644
index aa4dd3e9b8d9..000000000000
--- a/include/configs/xpress.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2015-2016 Stefan Roese <[email protected]>
- *
- * Configuration settings for the CCV xPress board
- */
-#ifndef __XPRESS_CONFIG_H
-#define __XPRESS_CONFIG_H
-
-#include "mx6_common.h"
-#include <asm/mach-imx/gpio.h>
-
-#define CFG_MXC_UART_BASE MX6UL_UART7_BASE_ADDR
-
-/* MMC Configs */
-#define CFG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
-
-/* Miscellaneous configurable options */
-
-/* Physical Memory Map */
-#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
-#define PHYS_SDRAM_SIZE (128 << 20)
-
-#define CFG_SYS_SDRAM_BASE PHYS_SDRAM
-#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
-#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE
-
-/* Environment is in stored in the eMMC boot partition */
-
-#define CFG_FEC_ENET_DEV 0
-#define CFG_FEC_MXC_PHYADDR 0x0
-
-#define CFG_EXTRA_ENV_SETTINGS \
- "script=boot.scr\0" \
- "image=zImage\0" \
- "console=ttymxc6\0" \
- "fdt_high=0xffffffff\0" \
- "initrd_high=0xffffffff\0" \
- "fdt_file=undefined\0" \
- "fdt_addr=0x83000000\0" \
- "boot_fdt=try\0" \
- "ip_dyn=yes\0" \
- "mmcdev="__stringify(CONFIG_ENV_MMC_DEVICE_INDEX)"\0" \
- "mmcpart=1\0" \
- "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
- "mmcautodetect=yes\0" \
- "mmcargs=setenv bootargs console=${console},${baudrate} " \
- "root=${mmcroot}\0" \
- "loadbootscript=" \
- "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
- "bootscript=echo Running bootscript from mmc ...; " \
- "source\0" \
- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
- "mmcboot=echo Booting from mmc ...; " \
- "run mmcargs; " \
- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
- "if run loadfdt; then " \
- "bootz ${loadaddr} - ${fdt_addr}; " \
- "else " \
- "if test ${boot_fdt} = try; then " \
- "bootz; " \
- "else " \
- "echo WARN: Cannot load the DT; " \
- "fi; " \
- "fi; " \
- "else " \
- "bootz; " \
- "fi;\0" \
- "uboot=ccv/u-boot.imx\0" \
- "uboot_start=0x2\0" \
- "uboot_size=0x3fe\0" \
- "update_uboot=if tftp ${uboot}; then " \
- "if itest ${filesize} > 0; then " \
- "mmc dev 0 1;" \
- "setexpr blkc ${filesize} / 0x200;" \
- "setexpr blkc ${blkc} + 1;" \
- "if itest ${blkc} <= ${uboot_size}; then " \
- "mmc write ${loadaddr} ${uboot_start} " \
- "${blkc};" \
- "fi;" \
- "fi; fi;" \
- "setenv filesize; setenv blkc\0" \
- "update_bootpart=mmc bootbus 0 2 1 2;mmc partconf 0 1 1 0\0"
-
-#endif /* __XPRESS_CONFIG_H */
--
2.43.0
