On 15/11/2025 12:04 am, Brian Sune wrote:
[CAUTION: This email is from outside your organization. Unless you trust the sender, do not click on links or open attachments as it may be a fraudulent email attempting to steal your information and/or compromise your computer.] Since U-Boot 2025.07 pure SD Card boot no longer works. Now Altera released 2025.07 shows the different on the u-boot files. After testing, the major root case is get_managers_addr. And this patch fix the SD boot stall via pulling from offical. Signed-off-by: Brian Sune <[email protected]> --- arch/arm/mach-socfpga/misc.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-socfpga/misc.c b/arch/arm/mach-socfpga/misc.c index 76747c2196a..07694107c8a 100644 --- a/arch/arm/mach-socfpga/misc.c +++ b/arch/arm/mach-socfpga/misc.c @@ -222,7 +222,7 @@ static int do_bridge(struct cmd_tbl *cmdtp, int flag, int argc, } U_BOOT_CMD(bridge, 3, 1, do_bridge, - "SoCFPGA HPS FPGA bridge control", + "GEN5 SoCFPGA HPS FPGA bridge control", "enable [mask] - Enable HPS-to-FPGA (Bit 0), LWHPS-to-FPGA (Bit 1), FPGA-to-HPS (Bit 2) bridges\n" "bridge disable [mask] - Disable HPS-to-FPGA (Bit 0), LWHPS-to-FPGA (Bit 1), FPGA-to-HPS (Bit 2) bridges\n" "" @@ -261,7 +261,16 @@ void socfpga_get_managers_addr(void) if (ret) hang(); - else if (IS_ENABLED(CONFIG_TARGET_SOCFPGA_N5X)) + if (!IS_ENABLED(CONFIG_TARGET_SOCFPGA_AGILEX) && + !IS_ENABLED(CONFIG_TARGET_SOCFPGA_AGILEX7M) && + !IS_ENABLED(CONFIG_TARGET_SOCFPGA_AGILEX5)) { + ret = socfpga_get_base_addr("altr,sys-mgr", + &socfpga_sysmgr_base); + if (ret) + hang(); + } + + if (IS_ENABLED(CONFIG_TARGET_SOCFPGA_N5X)) ret = socfpga_get_base_addr("intel,n5x-clkmgr", &socfpga_clkmgr_base); else if (!IS_ENABLED(CONFIG_TARGET_SOCFPGA_AGILEX) && -- 2.34.1
Reviewed-by: Tien Fong Chee <[email protected]> Best regards, Tien Fong
