Add basic support for Allwinner A733 SoC. - Include some basic register definitions - Introduce a new SUN60I A733 Kconfig option - Ssetup RVBAR register properly according to docs - Config max DDR size 16GB - Config SRAM 0x62000 for TF-A
Signed-off-by: Yixun Lan <[email protected]> --- Note, Address for TF-A can be altered to other value, for example, moving it to the DDR address space. The only requirement is that load and run address should be matched. --- arch/arm/mach-sunxi/Kconfig | 14 ++++++++++++++ arch/arm/mach-sunxi/cpu_info.c | 2 ++ include/configs/sun60i.h | 11 +++++++++++ 3 files changed, 27 insertions(+) diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index e979ee4a2cc..e6b4ac3688b 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -215,6 +215,7 @@ config SUNXI_SRAM_ADDRESS hex default 0x10000 if MACH_SUN9I || MACH_SUN50I || MACH_SUN50I_H5 default 0x44000 if MACH_SUN55I_A523 + default 0x47000 if MACH_SUN60I_A733 default 0x20000 if SUN50I_GEN_H6 || SUNXI_GEN_NCAT2 default 0x0 ---help--- @@ -228,6 +229,7 @@ config SUNXI_RVBAR_ADDRESS depends on ARM64 default 0x08100040 if MACH_SUN50I_A133 default 0x08000040 if MACH_SUN55I_A523 + default 0x08001004 if MACH_SUN60I_A733 default 0x09010040 if SUN50I_GEN_H6 default 0x017000a0 ---help--- @@ -257,6 +259,7 @@ config SUNXI_BL31_BASE default 0x40000000 if MACH_SUN50I_H616 default 0x00104000 if SUN50I_GEN_H6 default 0x00054000 if MACH_SUN55I_A523 + default 0x00062000 if MACH_SUN60I_A733 default 0x0 help Address where BL31 (TF-A) is loaded, or zero if BL31 is not used. @@ -339,6 +342,7 @@ config MACH_SUNXI_H3_H5 config SUNXI_DRAM_MAX_SIZE hex default 0x100000000 if MACH_SUN50I_H616 || MACH_SUN50I_A133 || MACH_SUN55I_A523 + default 0x400000000 if MACH_SUN60I_A733 default 0xC0000000 if MACH_SUN50I || MACH_SUN50I_H5 || MACH_SUN50I_H6 default 0x80000000 @@ -553,6 +557,14 @@ config MACH_SUN55I_A523 select SPL_LOAD_FIT if SPL imply OF_UPSTREAM +config MACH_SUN60I_A733 + bool "sun60i (Allwinner A733)" + select ARM64 + select SUNXI_GEN_NCAT2 + select FIT + select SPL_LOAD_FIT if SPL + select SUPPORT_SPL + endchoice # The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33" @@ -870,6 +882,7 @@ config SYS_CONFIG_NAME default "sun50i" if MACH_SUN50I_H616 default "sun50i" if MACH_SUN50I_A133 default "sun55i" if MACH_SUN55I_A523 + default "sun60i" if MACH_SUN60I_A733 config SYS_BOARD default "sunxi" @@ -1186,6 +1199,7 @@ config SPL_STACK_R_ADDR default 0x4fe00000 if MACH_SUN50I default 0x4fe00000 if SUN50I_GEN_H6 default 0x4fe00000 if SUNXI_GEN_NCAT2 + default 0x4fe00000 if MACH_SUN60I_A733 config SPL_SPI_SUNXI bool "Support for SPI Flash on Allwinner SoCs in SPL" diff --git a/arch/arm/mach-sunxi/cpu_info.c b/arch/arm/mach-sunxi/cpu_info.c index c3a51d9956e..f0b33bb9097 100644 --- a/arch/arm/mach-sunxi/cpu_info.c +++ b/arch/arm/mach-sunxi/cpu_info.c @@ -108,6 +108,8 @@ int print_cpuinfo(void) puts("CPU: Allwinner A133 (SUN50I)\n"); #elif defined CONFIG_MACH_SUN55I_A523 puts("CPU: Allwinner A523 (SUN55I)\n"); +#elif defined CONFIG_MACH_SUN60I_A733 + puts("CPU: Allwinner A733 (SUN60I)\n"); #else #warning Please update cpu_info.c with correct CPU information puts("CPU: SUNXI Family\n"); diff --git a/include/configs/sun60i.h b/include/configs/sun60i.h new file mode 100644 index 00000000000..70649366c1c --- /dev/null +++ b/include/configs/sun60i.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Placeholder wrapper to allow addressing Allwinner devices with Cortex-A55 + * cores separately. Please do not add anything in here. + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <configs/sunxi-common.h> + +#endif /* __CONFIG_H */ -- 2.51.2
