Yuslaimi, Alif Zakuan <[email protected]> 於 2025年12月3日週三 下午2:46寫道： > > Hi, > > On 2/12/2025 4:59 pm, Sune Brian wrote: > > [CAUTION: This email is from outside your organization. Unless you trust > > the sender, do not click on links or open attachments as it may be a > > fraudulent email attempting to steal your information and/or compromise > > your computer.] > > > > Ilias Apalodimas <[email protected]> 於 2025年12月2日週二 下午4:53寫道： > >> > >> [...] > >> > >>>> > >>>> Ok, let me go through my irc logs in case I find it. > >>>> Reading the email thread we should compile with anything > 8.1 right? > >>>> > >>>> Cheers > >>>> /Ilias > >>>>> > >>>>> -- > >>>>> Tom > >>> > >>> Hi llias and Tom, > >>> > >>> I have a question might be wrong or not even exist. > >>> Tom mentioned GCC 8.1 kbuild but u-boot is considered as > >>> kernel build or it does not always be that case? > >> > >> We use the same Kbuild system as the kernel. I updated that a few > >> months ago since we where stuck on a really old version. > >> > >>> > >>> At least so fat there are nothing can build properly below 10.0.1 > >>> Using ARM official cross compile binaries. > >> > >> I think I tested with gcc11, but I I don't remember testing with 8.x. > >> I probably missed something on the backporting. I'll try having a look > >> > >> Cheers > >> /Ilias > >>> > >>> Thanks, > >>> Brian > > > > Thank you IIias I don't really know all the u-boot things. > > I had provided the first draft for fixing GCC check. > > https://patchwork.ozlabs.org/project/uboot/patch/[email protected]/ > > Now it is on 10.0.1 if 8.1 is the case will update after your confirmation. > > > > Thanks, > > Brian > > I am able to build CycloneV with the later GCC 10.3 version on my side > without this patch included in the patch series. > > Thank you all for your valuable inputs. > > Alif
Hi Alif It is possible to align both sides with ARM official binary release? The ARM have compressed cross-compiled binary. 10.0.1 should be the minimum it can runs. [1] https://developer.arm.com/downloads/-/gnu-a Thanks, Brian
