Current code just bind mt7531 mdio with it's driver, so mdio device may
not be probed and hense not usable.

This patch
 * use mt7531 mdio for GDM1 port
 * set mdio bus for the GDM port (if corresponding mdio/phydev is available)

Signed-off-by: Mikhail Kshevetskiy <[email protected]>
---
 drivers/net/airoha_eth.c | 40 ++++++++++++++++++++++++++++++++++++----
 1 file changed, 36 insertions(+), 4 deletions(-)

diff --git a/drivers/net/airoha_eth.c b/drivers/net/airoha_eth.c
index 63f57d299ed..d31e44b652d 100644
--- a/drivers/net/airoha_eth.c
+++ b/drivers/net/airoha_eth.c
@@ -12,6 +12,7 @@
 #include <dm/device-internal.h>
 #include <dm/devres.h>
 #include <dm/lists.h>
+#include <eth_phy.h>
 #include <mapmem.h>
 #include <miiphy.h>
 #include <net.h>
@@ -334,6 +335,7 @@ struct airoha_gdm_port {
 struct airoha_eth {
        void __iomem *fe_regs;
        void __iomem *switch_regs;
+       struct udevice *switch_mdio_dev;
 
        struct reset_ctl_bulk rsts;
        struct reset_ctl_bulk xsi_rsts;
@@ -941,6 +943,8 @@ static int airoha_eth_port_probe(struct udevice *dev)
 {
        struct airoha_eth *eth = (void *)dev_get_driver_data(dev);
        struct airoha_gdm_port *port = dev_get_priv(dev);
+       struct mdio_perdev_priv *pdata;
+       struct mii_dev *mdio_bus;
        int ret;
 
        port->qdma = &eth->qdma[0];
@@ -949,6 +953,7 @@ static int airoha_eth_port_probe(struct udevice *dev)
        if (ret)
                return ret;
 
+       mdio_bus = NULL;
        if (port->id > 1) {
 #if defined(CONFIG_PCS_AIROHA)
                ret = airoha_pcs_init(dev);
@@ -956,11 +961,24 @@ static int airoha_eth_port_probe(struct udevice *dev)
                        return ret;
 
                port->phydev = dm_eth_phy_connect(dev);
+               if (port->phydev)
+                       mdio_bus = port->phydev->bus;
 #else
                return -EINVAL;
 #endif
+       } else {
+               if (eth->switch_mdio_dev &&
+                   !device_probe(eth->switch_mdio_dev)) {
+                       pdata = dev_get_uclass_priv(eth->switch_mdio_dev);
+                       mdio_bus = pdata->mii_bus;
+               }
        }
 
+#ifdef CONFIG_DM_ETH_PHY
+       if (!IS_ERR_OR_NULL(mdio_bus))
+               eth_phy_set_mdio_bus(dev, mdio_bus);
+#endif
+
        return 0;
 }
 
@@ -1205,8 +1223,10 @@ static int arht_eth_write_hwaddr(struct udevice *dev)
 static int airoha_eth_bind(struct udevice *dev)
 {
        struct airoha_eth_soc_data *data = (void *)dev_get_driver_data(dev);
+       struct airoha_eth *eth = dev_get_priv(dev);
        ofnode switch_node, mdio_node;
-       struct udevice *mdio_dev;
+       const char *name;
+       char *mdio_name;
        int ret;
 
        /*
@@ -1231,10 +1251,22 @@ static int airoha_eth_bind(struct udevice *dev)
                return 0;
        }
 
-       ret = device_bind_driver_to_node(dev, "mt7531-mdio-mmio", "mdio",
-                                        mdio_node, &mdio_dev);
-       if (ret)
+       name = strchr(data->switch_compatible, ',');
+       name = name ? name + 1 : data->switch_compatible;
+       mdio_name = malloc(strlen(name) + strlen("-mdio") + 1);
+       if (!mdio_name) {
+               debug("Warning: no memory for mdio bus name\n");
+               return 0;
+       }
+
+       sprintf(mdio_name, "%s-mdio", name);
+       ret = device_bind_driver_to_node(dev, "mt7531-mdio-mmio", mdio_name,
+                                        mdio_node, &eth->switch_mdio_dev);
+       if (ret) {
                debug("Warning: failed to bind mdio controller\n");
+               free(mdio_name);
+               return 0;
+       }
 
        return 0;
 }
-- 
2.51.0

Reply via email to