On 12/3/25 15:23, Patrice CHOTARD wrote:
>
>
> On 11/19/25 00:17, Marek Vasut wrote:
>> Commit c37a6684818d ("stm32mp: fix compilation issue with DEBUG_UART")
>> split the debug UART initialization code into two files, but failed to
>> update other non-ST boards. This did not lead to noticeable breakage
>> until debug UART is enabled, which is not the default. Update the
>> Makefile accordingly to allow debug UART to work.
>>
>> Fixes: c37a6684818d ("stm32mp: fix compilation issue with DEBUG_UART")
>> Signed-off-by: Marek Vasut <[email protected]>
>> ---
>> Cc: Patrice Chotard <[email protected]>
>> Cc: Patrick Delaunay <[email protected]>
>> Cc: Tom Rini <[email protected]>
>> Cc: [email protected]
>> Cc: [email protected]
>> Cc: [email protected]
>> ---
>> board/dhelectronics/dh_stm32mp1/Makefile | 2 ++
>> 1 file changed, 2 insertions(+)
>>
>> diff --git a/board/dhelectronics/dh_stm32mp1/Makefile
>> b/board/dhelectronics/dh_stm32mp1/Makefile
>> index 2f4a301d1a0..429e01453bb 100644
>> --- a/board/dhelectronics/dh_stm32mp1/Makefile
>> +++ b/board/dhelectronics/dh_stm32mp1/Makefile
>> @@ -3,6 +3,8 @@
>> # Copyright (C) 2018, STMicroelectronics - All Rights Reserved
>> #
>>
>> +obj-$(CONFIG_DEBUG_UART_BOARD_INIT) += ../../st/stm32mp1/debug_uart.o
>> +
>> obj-$(CONFIG_PMIC_STPMIC1) += ../../st/common/stpmic1.o
>> obj-y += board.o
>>
>
>
> Reviewed-by: Patrice Chotard <[email protected]>
>
> Thanks
> Patrice
Applied to u-boot-stm32/next
Thanks
Patrice
