On 12/3/25 08:36, Michal Simek wrote:
From: Padmarao Begari <[email protected]>
Add board_boot_order() function and remove spl_boot_device()
function because it is called from weak board_boot_order().
Add support to U-Boot SPL for booting from RAM or SPI, as
configured in defconfig.
Signed-off-by: Padmarao Begari <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
---
board/xilinx/mbv/board.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/board/xilinx/mbv/board.c b/board/xilinx/mbv/board.c
index ed3fe16af7b9..2b0005955ca5 100644
--- a/board/xilinx/mbv/board.c
+++ b/board/xilinx/mbv/board.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * (C) Copyright 2023, Advanced Micro Devices, Inc.
+ * (C) Copyright 2023-2025, Advanced Micro Devices, Inc.
*
* Michal Simek <[email protected]>
*/
@@ -8,9 +8,15 @@
#include <spl.h>
#ifdef CONFIG_SPL
-u32 spl_boot_device(void)
+void board_boot_order(u32 *spl_boot_list)
{
- /* RISC-V QEMU only supports RAM as SPL boot device */
- return BOOT_DEVICE_RAM;
+ u32 i = 0;
+
+ if (CONFIG_IS_ENABLED(SPI_FLASH_SUPPORT))
+ spl_boot_list[i++] = BOOT_DEVICE_SPI;
+
+ if (CONFIG_IS_ENABLED(RAM_SUPPORT))
+ spl_boot_list[i++] = BOOT_DEVICE_RAM;
+
}
#endif
Applied.
M
