On 12/17/25 13:51, Neal Frager wrote:
The default entry point address for the optee-os tee.bin for the zynqmp
platform is 0x60000000. For this reason, set the default u-boot BL32_LOAD_ADDR
to match the default optee-os entry point address of 0x60000000.
Signed-off-by: Neal Frager <[email protected]>
---
arch/arm/mach-zynqmp/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-zynqmp/Kconfig b/arch/arm/mach-zynqmp/Kconfig
index 151cfada436..8a4356bc060 100644
--- a/arch/arm/mach-zynqmp/Kconfig
+++ b/arch/arm/mach-zynqmp/Kconfig
@@ -138,7 +138,7 @@ config BL31_LOAD_ADDR
config BL32_LOAD_ADDR
hex "Load address of BL32 image (mostly secure OS)"
- default 0
+ default 0x60000000
help
The load address for the BL32 image. This value is used to build the
FIT image header that places BL32 in memory where it will run.
Applied.
M
