On Thu, Dec 18, 2025 at 11:45:53AM +0530, Varadarajan Narayanan wrote: > Imported from Linux driver.
Kindly add information as to which kernel driver commit you have used to import this code. -Sumit > > Signed-off-by: Varadarajan Narayanan <[email protected]> > --- > drivers/phy/qcom/phy-qcom-qusb2.c | 42 +++++++++++++++++++++++++++++++ > 1 file changed, 42 insertions(+) > > diff --git a/drivers/phy/qcom/phy-qcom-qusb2.c > b/drivers/phy/qcom/phy-qcom-qusb2.c > index d98f6108e69..df82f2a99da 100644 > --- a/drivers/phy/qcom/phy-qcom-qusb2.c > +++ b/drivers/phy/qcom/phy-qcom-qusb2.c > @@ -152,6 +152,22 @@ enum qusb2phy_reg_layout { > .offset = o, .val = v, .in_layout = 1, \ > } > > +static const struct qusb2_phy_init_tbl ipq6018_init_tbl[] = { > + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL, 0x14), > + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xF8), > + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0xB3), > + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0x83), > + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0xC0), > + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TUNE, 0x30), > + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL1, 0x79), > + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL2, 0x21), > + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE5, 0x00), > + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00), > + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TEST2, 0x14), > + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TEST, 0x80), > + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9F), > +}; > + > static const struct qusb2_phy_init_tbl sm6115_init_tbl[] = { > QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xf8), > QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x53), > @@ -168,6 +184,19 @@ static const struct qusb2_phy_init_tbl sm6115_init_tbl[] > = { > QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00), > }; > > +static const unsigned int ipq6018_regs_layout[] = { > + [QUSB2PHY_PLL_STATUS] = 0x38, > + [QUSB2PHY_PORT_TUNE1] = 0x80, > + [QUSB2PHY_PORT_TUNE2] = 0x84, > + [QUSB2PHY_PORT_TUNE3] = 0x88, > + [QUSB2PHY_PORT_TUNE4] = 0x8C, > + [QUSB2PHY_PORT_TUNE5] = 0x90, > + [QUSB2PHY_PORT_TEST1] = 0x98, > + [QUSB2PHY_PORT_TEST2] = 0x9C, > + [QUSB2PHY_PORT_POWERDOWN] = 0xB4, > + [QUSB2PHY_INTR_CTRL] = 0xBC, > +}; > + > static const unsigned int sm6115_regs_layout[] = { > [QUSB2PHY_PLL_STATUS] = 0x38, [QUSB2PHY_PORT_TUNE1] = 0x80, > [QUSB2PHY_PORT_TUNE2] = 0x84, [QUSB2PHY_PORT_TUNE3] = 0x88, > @@ -224,6 +253,17 @@ static const unsigned int qusb2_v2_regs_layout[] = { > [QUSB2PHY_INTR_CTRL] = 0x230, > }; > > +static const struct qusb2_phy_cfg ipq6018_phy_cfg = { > + .tbl = ipq6018_init_tbl, > + .tbl_num = ARRAY_SIZE(ipq6018_init_tbl), > + .regs = ipq6018_regs_layout, > + > + .disable_ctrl = POWER_DOWN, > + .mask_core_ready = PLL_LOCKED, > + /* autoresume not used */ > + .autoresume_en = BIT(0), > +}; > + > static const struct qusb2_phy_cfg sm6115_phy_cfg = { > .tbl = sm6115_init_tbl, > .tbl_num = ARRAY_SIZE(sm6115_init_tbl), > @@ -455,6 +495,8 @@ static const struct udevice_id qusb2phy_ids[] = { > .data = (ulong)&sm6115_phy_cfg }, > { .compatible = "qcom,sdm660-qusb2-phy", > .data = (ulong)&sdm660_phy_cfg }, > + { .compatible = "qcom,ipq9574-qusb2-phy", > + .data = (ulong)&ipq6018_phy_cfg }, > { .compatible = "qcom,sm6115-qusb2-phy", > .data = (ulong)&sm6115_phy_cfg }, > { .compatible = "qcom,qusb2-v2-phy", .data = (ulong)&qusb2_v2_phy_cfg }, > -- > 2.34.1 >
