Add more clocks for UART2, i2c9 and a few others. This is enough to get the rubikpi 3 working.
Signed-off-by: Casey Connolly <[email protected]> --- drivers/clk/qcom/clock-sc7280.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/clk/qcom/clock-sc7280.c b/drivers/clk/qcom/clock-sc7280.c index 55a233df3945..7b6ed8260236 100644 --- a/drivers/clk/qcom/clock-sc7280.c +++ b/drivers/clk/qcom/clock-sc7280.c @@ -62,8 +62,13 @@ static ulong sc7280_set_rate(struct clk *clk, ulong rate) if (clk->id < priv->data->num_clks) debug("%s: %s, requested rate=%ld\n", __func__, priv->data->clks[clk->id].name, rate); switch (clk->id) { + case GCC_QUPV3_WRAP0_S2_CLK: /* UART2 */ + freq = qcom_find_freq(ftbl_gcc_qupv3_wrap0_s2_clk_src, rate); + clk_rcg_set_rate_mnd(priv->base, 0x17270, + freq->pre_div, freq->m, freq->n, freq->src, 16); + return freq->freq; case GCC_QUPV3_WRAP0_S5_CLK: /* UART5 */ freq = qcom_find_freq(ftbl_gcc_qupv3_wrap0_s2_clk_src, rate); clk_rcg_set_rate_mnd(priv->base, 0x17600, freq->pre_div, freq->m, freq->n, freq->src, 16); @@ -131,11 +136,15 @@ static const struct gate_clk sc7280_clks[] = { GATE_CLK(GCC_AGGRE_NOC_PCIE_1_AXI_CLK, 0x52000, BIT(11)), GATE_CLK(GCC_AGGRE_NOC_PCIE_CENTER_SF_AXI_CLK, 0x52008, BIT(28)), GATE_CLK(GCC_QUPV3_WRAP0_S0_CLK, 0x52008, BIT(10)), GATE_CLK(GCC_QUPV3_WRAP0_S1_CLK, 0x52008, BIT(11)), + GATE_CLK(GCC_QUPV3_WRAP0_S2_CLK, 0x52008, BIT(12)), GATE_CLK(GCC_QUPV3_WRAP0_S3_CLK, 0x52008, BIT(13)), + GATE_CLK(GCC_QUPV3_WRAP0_S4_CLK, 0x52008, BIT(14)), GATE_CLK(GCC_QUPV3_WRAP0_S5_CLK, 0x52008, BIT(15)), + GATE_CLK(GCC_QUPV3_WRAP0_S6_CLK, 0x52008, BIT(16)), GATE_CLK(GCC_QUPV3_WRAP0_S7_CLK, 0x52008, BIT(17)), + GATE_CLK(GCC_QUPV3_WRAP1_S1_CLK, 0x52008, BIT(23)), GATE_CLK(GCC_UFS_PHY_AXI_CLK, 0x77010, BIT(0)), GATE_CLK(GCC_AGGRE_UFS_PHY_AXI_CLK, 0x770cc, BIT(0)), GATE_CLK(GCC_UFS_PHY_AHB_CLK, 0x77018, BIT(0)), GATE_CLK(GCC_UFS_PHY_UNIPRO_CORE_CLK, 0x7705c, BIT(0)), @@ -189,8 +198,11 @@ static int sc7280_enable(struct clk *clk) break; case GCC_QUPV3_WRAP0_S3_CLK: clk_rcg_set_rate_mnd(priv->base, 0x173a0, 1, 0, 0, CFG_CLK_SRC_CXO, 16); break; + case GCC_QUPV3_WRAP1_S1_CLK: + clk_rcg_set_rate_mnd(priv->base, 0x18140, 1, 0, 0, CFG_CLK_SRC_CXO, 16); + break; } return qcom_gate_clk_en(priv, clk->id); } -- 2.51.0
