On Fri, Jan 09, 2026 at 02:26:25AM +0100, Jonas Karlman wrote: > Hi Yao Zi, > > On 10/20/2025 4:27 AM, Yao Zi wrote: > > On Sun, Oct 19, 2025 at 12:52:17PM +0200, Jonas Karlman wrote: > >> Hi Yao Zi, > >> > >> On 10/19/2025 7:26 AM, Yao Zi wrote: > >>> FriendlElec NanoPi Zero2 is a super-tiny development board based on > >>> RK3528A SoC. Add board-level configuration and U-Boot-specific > >>> devicetree piece for it. > >>> > >>> Signed-off-by: Yao Zi <[email protected]> > >>> --- > >>> arch/arm/dts/rk3528-nanopi-zero2-u-boot.dtsi | 11 +++++ > >>> arch/arm/mach-rockchip/rk3528/MAINTAINERS | 6 +++ > >>> configs/nanopi-zero2_defconfig | 46 ++++++++++++++++++++ > >>> doc/board/rockchip/rockchip.rst | 1 + > >>> 4 files changed, 64 insertions(+) > >>> create mode 100644 arch/arm/dts/rk3528-nanopi-zero2-u-boot.dtsi > >>> create mode 100644 configs/nanopi-zero2_defconfig
... > >> With above adjustments this closely matches the defconfig I have been > >> carrying in my rk3528 branch at [1] a few months. > >> > >> So with above fixed this is: > >> > >> Reviewed-by: Jonas Karlman <[email protected]> > > > > Thanks, these changes are all reasonable and I'll adapt them in v2. > > Seems I did something wrong when doing savedefconfig and lost some > > defconfig changes... > > Are you planing on sending out a v2 of this? > > I still carry my old version of this in my rk3528 branch, see [2], I > can send that commit out if you do not have time to send a v2? Sure, please go ahead and send yours instead, thanks. Sorry for the huge delay. > Btw, I should be able to send out a new revision of the Linux RK3528 USB > series any day now, once I have completed re-testing. > > [2] > https://source.denx.de/u-boot/contributors/kwiboo/u-boot/-/commit/e3f251b7828ddc09f0bc1c2240687c5ad22a40df > > Regards, > Jonas Regards, Yao Zi > > > >> [1] > >> https://source.denx.de/u-boot/contributors/kwiboo/u-boot/-/commits/rk3528 > >> > >> I plan to send out a series with the ROCK-2 and Sige1 board additions > >> shortly. > >> > >> Regards, > >> Jonas > > > > Best regards, > > Yao Zi >
