On 12/19/25 15:09, Michal Simek wrote:
zcu102 has PCIe x1 enabled by default that's why enable PCIe root port driver also with e1000 networking card for validation. Signed-off-by: Michal Simek <[email protected]> --- configs/xilinx_zynqmp_virt_defconfig | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig index fc610fd4af5f..bb79ddf989e4 100644 --- a/configs/xilinx_zynqmp_virt_defconfig +++ b/configs/xilinx_zynqmp_virt_defconfig @@ -20,6 +20,7 @@ CONFIG_ENV_OFFSET_REDUND=0x1E80000 CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_CMD_FRU=y +CONFIG_PCI=y CONFIG_AHCI=y CONFIG_SYS_MEMTEST_START=0x00000000 CONFIG_SYS_MEMTEST_END=0x00001000 @@ -76,6 +77,7 @@ CONFIG_CMD_MMC=y CONFIG_MMC_SPEED_MODE_SET=y CONFIG_CMD_MTD=y CONFIG_CMD_NAND_LOCK_UNLOCK=y +CONFIG_CMD_PCI=y CONFIG_CMD_POWEROFF=y CONFIG_CMD_SDRAM=y CONFIG_CMD_SF_TEST=y @@ -180,8 +182,10 @@ CONFIG_PHY_XILINX=y CONFIG_PHY_XILINX_GMII2RGMII=y CONFIG_PHY_FIXED=y CONFIG_DM_ETH_PHY=y +CONFIG_E1000=y CONFIG_XILINX_AXIEMAC=y CONFIG_ZYNQ_GEM=y +CONFIG_PCIE_XILINX_NWL=y CONFIG_POWER_DOMAIN=y CONFIG_ZYNQMP_POWER_DOMAIN=y CONFIG_DM_REGULATOR=y
Applied. M
