Correct USB30 primary clock RCG configuration and add missing
USB3_PRIM_PHY_AUX_CMD_RCGR RCG configuration.
Above taken from Linux commit 08c51ceb12f7 ("clk: qcom: add the GCC driver for
sa8775p")
Add missing USB3_PRIM_PHY_PIPE_CLK gate clock definition.
Extend reset map with USB-related BCR entries and video BCR
for comprehensive reset control support.
Signed-off-by: Balaji Selvanathan <[email protected]>
---
drivers/clk/qcom/clock-sa8775p.c | 28 ++++++++++++++++++++++++----
1 file changed, 24 insertions(+), 4 deletions(-)
diff --git a/drivers/clk/qcom/clock-sa8775p.c b/drivers/clk/qcom/clock-sa8775p.c
index 5a6fbd417ff..25c8cd4af9a 100644
--- a/drivers/clk/qcom/clock-sa8775p.c
+++ b/drivers/clk/qcom/clock-sa8775p.c
@@ -15,8 +15,9 @@
#include <dt-bindings/clock/qcom,sa8775p-gcc.h>
#include "clock-qcom.h"
-#define USB30_PRIM_MOCK_UTMI_CLK_CMD_RCGR 0xf038
-#define USB30_PRIM_MASTER_CLK_CMD_RCGR 0xf020
+#define USB30_PRIM_MOCK_UTMI_CLK_CMD_RCGR 0x1b040
+#define USB30_PRIM_MASTER_CLK_CMD_RCGR 0x1b028
+#define USB3_PRIM_PHY_AUX_CMD_RCGR 0x1b06c
#define GCC_QUPV3_WRAP0_S0_CLK_ENA_BIT BIT(10)
#define GCC_QUPV3_WRAP0_S1_CLK_ENA_BIT BIT(11)
@@ -59,8 +60,8 @@ static ulong sa8775p_set_rate(struct clk *clk, ulong rate)
case GCC_USB30_PRIM_MASTER_CLK:
WARN(rate != 200000000, "Unexpected rate for
USB30_PRIM_MASTER_CLK: %lu\n", rate);
clk_rcg_set_rate_mnd(priv->base, USB30_PRIM_MASTER_CLK_CMD_RCGR,
- 1, 0, 0, CFG_CLK_SRC_GPLL0_ODD, 8);
- clk_rcg_set_rate(priv->base, 0xf064, 0, 0);
+ 5, 0, 0, CFG_CLK_SRC_GPLL0, 8);
+ clk_rcg_set_rate(priv->base, USB3_PRIM_PHY_AUX_CMD_RCGR, 0, 0);
return rate;
default:
return 0;
@@ -75,6 +76,7 @@ static const struct gate_clk sa8775p_clks[] = {
GATE_CLK(GCC_USB30_PRIM_MOCK_UTMI_CLK, 0x1b024, 1),
GATE_CLK(GCC_USB3_PRIM_PHY_AUX_CLK, 0x1b05c, 1),
GATE_CLK(GCC_USB3_PRIM_PHY_COM_AUX_CLK, 0x1b060, 1),
+ GATE_CLK(GCC_USB3_PRIM_PHY_PIPE_CLK, 0x1b064, 1),
/* QUP Wrapper 0 clocks */
GATE_CLK(GCC_QUPV3_WRAP0_S0_CLK, 0x4b008,
GCC_QUPV3_WRAP0_S0_CLK_ENA_BIT),
@@ -157,6 +159,24 @@ static const struct qcom_reset_map sa8775p_gcc_resets[] = {
[GCC_TSCSS_BCR] = { 0x21000 },
[GCC_UFS_CARD_BCR] = { 0x81000 },
[GCC_UFS_PHY_BCR] = { 0x83000 },
+ [GCC_USB20_PRIM_BCR] = {0x1c000},
+ [GCC_USB2_PHY_PRIM_BCR] = {0x5c028},
+ [GCC_USB2_PHY_SEC_BCR] = {0x5c02c},
+ [GCC_USB30_PRIM_BCR] = {0x1b000},
+ [GCC_USB30_SEC_BCR] = {0x2f000},
+ [GCC_USB3_DP_PHY_PRIM_BCR] = {0x5c008},
+ [GCC_USB3_DP_PHY_SEC_BCR] = {0x5c014},
+ [GCC_USB3_PHY_PRIM_BCR] = {0x5c000},
+ [GCC_USB3_PHY_SEC_BCR] = {0x5c00c},
+ [GCC_USB3_PHY_TERT_BCR] = {0x5c030},
+ [GCC_USB3_UNIPHY_MP0_BCR] = {0x5c018},
+ [GCC_USB3_UNIPHY_MP1_BCR] = {0x5c01c},
+ [GCC_USB3PHY_PHY_PRIM_BCR] = {0x5c004},
+ [GCC_USB3PHY_PHY_SEC_BCR] = {0x5c010},
+ [GCC_USB3UNIPHY_PHY_MP0_BCR] = {0x5c020},
+ [GCC_USB3UNIPHY_PHY_MP1_BCR] = {0x5c024},
+ [GCC_USB_PHY_CFG_AHB2PHY_BCR] = {0x76000},
+ [GCC_VIDEO_BCR] = {0x34000}
};
static const struct qcom_power_map sa8775p_gdscs[] = {
--
2.34.1
