Since the commit 1e24e84db41a ("tiny-printf: Handle formatting of %p
with an extra Kconfig"), SPL_USE_TINY_PRINTF_POINTER_SUPPORT has been
made mandatory in order to use %p which would earlier have defaulted to
a 'long' print.Without this config symbol, k3_sysfw_dfu_download fails to set the correct value for the DFU string with: sprintf(dfu_str, "sysfw.itb ram 0x%p 0x%x", addr, CONFIG_K3_SYSFW_IMAGE_SIZE_MAX); The value we get "sysfw.itb ram 0x? 0x41c29d40" causes a boot failure. Therefore this patch sets SPL_USE_TINY_PRINTF_POINTER_SUPPORT for all K3 devices since the size impact is less than 100 bytes. Signed-off-by: Anshul Dalal <[email protected]> --- Changes in v4: - Enable pointer support for only DFU configs on ARMv7 cores - Link to v3: https://lore.kernel.org/r/[email protected] Changes in v3: - Handle setting the config in Kconfig instead of the defconfig - Link to v2: https://lore.kernel.org/r/[email protected] Changes in v2: - Remove unrelated changes - Link to v1: https://lore.kernel.org/r/[email protected] --- arch/arm/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 0485fe78e10..2df28d71d75 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -836,6 +836,7 @@ config ARCH_K3 select DMA_ADDR_T_64BIT select LTO select SPL_LOAD_FIT if SPL + select SPL_USE_TINY_PRINTF_POINTER_SUPPORT if SPL_USE_TINY_PRINTF && DFU && CPU_V7R imply TI_SECURE_DEVICE imply DM_RNG if ARM64 imply TEE if ARM64 --- base-commit: cde150b5e15f291618c120e047fd85393123c091 change-id: 20251105-am65_dfu_fix-1144eec06b19 Best regards, -- Anshul Dalal <[email protected]>
