From: Caleb Ethridge <[email protected]>
Date: Mon, 9 Feb 2026 10:00:10 -0500
Subject: [PATCH v2] arm: dts: sc594: Update sc594 EZKIT GPIO polarities
Updates the polarities for the GPIOs on the sc594
EZKIT carrier board for the newest revision, Rev D.
The new carrier board revision has different polarities
for some GPIOs. This patch updates the sc594 entries
to match the sc598 entries that were updated in a previous
commit, as both SOMs can utilize the EZKIT.
Note that these updates are for the EZKIT carrier
board used by both sc598 and sc594 SOMs, not the SOMs themselves.
Fixes: be79378 ("board: adi: Add support for SC594")
Signed-off-by: Caleb Ethridge <[email protected]>
---
Changes in v2:
- Updated commit message with more detail according to reviewer feedback
---
arch/arm/dts/sc594-som-ezkit.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/dts/sc594-som-ezkit.dts b/arch/arm/dts/sc594-som-ezkit.dts
index eeca6d17504..11154e65ed6 100644
--- a/arch/arm/dts/sc594-som-ezkit.dts
+++ b/arch/arm/dts/sc594-som-ezkit.dts
@@ -22,7 +22,7 @@
eeprom {
gpio-hog;
- gpios = <0 GPIO_ACTIVE_HIGH>;
+ gpios = <0 GPIO_ACTIVE_LOW>;
output-low;
line-name = "eeprom-en";
bootph-pre-ram;
@@ -30,7 +30,7 @@
pushbutton {
gpio-hog;
- gpios = <1 GPIO_ACTIVE_HIGH>;
+ gpios = <1 GPIO_ACTIVE_LOW>;
output-low;
line-name = "pushbutton-en";
bootph-pre-ram;
@@ -70,7 +70,7 @@
octal {
gpio-hog;
- gpios = <8 GPIO_ACTIVE_HIGH>;
+ gpios = <8 GPIO_ACTIVE_LOW>;
output-low;
line-name = "octal-spi-cs-en";
bootph-pre-ram;
--
2.34.1
