On Fri, Feb 13, 2026 at 02:31:18PM +0530, Balaji Selvanathan wrote: > Add support for GCC_USB3_PRIM_CLKREF_CLK to the QCS615 clock driver. > This clock is referenced in the device tree USB node but was not > implemented in U-Boot, causing "Clock 152 not found" warnings during > fastboot run. > > Signed-off-by: Balaji Selvanathan <[email protected]> > --- > Changes in v3: > - Add support for GCC_USB3_PRIM_CLKREF_CLK to the QCS615 clock driver. > - Removed the logic of removing GCC_USB3_PRIM_CLKREF_CLK from DTS node > > Changes in v2: > - No changes in v2 > --- > drivers/clk/qcom/clock-qcs615.c | 1 + > 1 file changed, 1 insertion(+) >
Reviewed-by: Sumit Garg <[email protected]> -Sumit > diff --git a/drivers/clk/qcom/clock-qcs615.c b/drivers/clk/qcom/clock-qcs615.c > index 4700baba8c9..65b8db04020 100644 > --- a/drivers/clk/qcom/clock-qcs615.c > +++ b/drivers/clk/qcom/clock-qcs615.c > @@ -66,6 +66,7 @@ static const struct gate_clk qcs615_clks[] = { > GATE_CLK(GCC_USB3_PRIM_PHY_AUX_CLK, 0xf050, BIT(0)), > GATE_CLK(GCC_USB3_PRIM_PHY_COM_AUX_CLK, 0xf054, BIT(0)), > GATE_CLK(GCC_USB3_PRIM_PHY_PIPE_CLK, 0xf058, BIT(0)), > + GATE_CLK(GCC_USB3_PRIM_CLKREF_CLK, 0x8c014, BIT(0)), > GATE_CLK(GCC_QUPV3_WRAP0_S0_CLK, 0x5200c, > GCC_QUPV3_WRAP0_S0_CLK_ENA_BIT), > GATE_CLK(GCC_QUPV3_WRAP0_S1_CLK, 0x5200c, > GCC_QUPV3_WRAP0_S1_CLK_ENA_BIT), > GATE_CLK(GCC_QUPV3_WRAP0_S2_CLK, 0x5200c, > GCC_QUPV3_WRAP0_S2_CLK_ENA_BIT), > > -- > 2.34.1 >
