> On 10.02.26 03:11, E Shattow wrote: > Hi Leo, Hal, Tom, and Heinrich, et.al > > On 2/9/26 03:21, Leo Liang wrote: > > On Fri, Oct 24, 2025 at 04:59:23PM +0800, Hal Feng wrote: > >> VisionFive 2 Lite is a mini SBC based on the StarFive JH7110S > >> industrial SoC which can run at -40~85 degrees centigrade and up to > 1.25GHz. > >> > >> Board features: > >> - JH7110S SoC > >> - 4/8 GiB LPDDR4 DRAM > >> - AXP15060 PMIC > >> - 40 pin GPIO header > >> - 1x USB 3.0 host port > >> - 3x USB 2.0 host port > >> - 1x M.2 M-Key (size: 2242) > >> - 1x MicroSD slot (optional non-removable 64GiB eMMC) > >> - 1x QSPI Flash > >> - 1x I2C EEPROM > >> - 1x 1Gbps Ethernet port > >> - SDIO-based Wi-Fi & UART-based Bluetooth > >> - 1x HDMI port > >> - 1x 2-lane DSI > >> - 1x 2-lane CSI > >> > >> VisionFive 2 Lite schematics: > >> https://doc- > en.rvspace.org/VisionFive2Lite/PDF/VF2_LITE_V1.10_TF_2025 > >> 0818_SCH.pdf VisionFive 2 Lite Quick Start Guide: > >> https://doc-en.rvspace.org/VisionFive2Lite/VisionFive2LiteQSG/index.h > >> tml More documents: > >> https://doc-en.rvspace.org/Doc_Center/visionfive_2_lite.html > >> > >> Note: Patch 1 and 2 are the kernel device tree picked from [1]. They > >> are just for test and please ignore them because dts/upstream should > >> be synced with devicetree-rebasing. > >> > >> [1] > >> https://lore.kernel.org/all/20250821100930.71404-1-hal.feng@starfivet > >> ech.com/ > >> > >> Changes since RFC: > >> - Rebase on the latest mainline. > >> - Improve the commit messages. > >> - Drop patch 7. > >> patch 3, 4: > >> - Return 0 instead of 0xFF if read_eeprom() fails. > >> patch 5: > >> - Keep default FORMAT_VERSION 0x2. > >> - Change wifi_bt field to onboard_module field and use bit 0 to mark > >> WIFI/BT. > >> - Drop all "no_eth0", "no_eth1" configuration. > >> > >> History: > >> RFC: > >> https://lore.kernel.org/all/20250829060931.79940-1-hal.feng@starfivet > >> ech.com/ > >> > >> Hal Feng (9): > >> riscv: dts: starfive: jh7110-common: Move out some nodes to the board > >> dts > >> riscv: dts: starfive: Add VisionFive 2 Lite board device tree > >> eeprom: starfive: Simplify get_ddr_size_from_eeprom() > >> eeprom: starfive: Correct get_pcb_revision_from_eeprom() > >> eeprom: starfive: Support eeprom data format v3 > >> pcie: starfive: Add a optional power gpio support > >> configs: visionfive2: Add VisionFive 2 Lite DT to OF_LIST > >> board: starfive: spl: Support VisionFive 2 Lite > >> board: starfive: visionfive2: Add VisionFive 2 Lite fdt selection > >> > >> arch/riscv/cpu/jh7110/spl.c | 2 +- > >> arch/riscv/include/asm/arch-jh7110/eeprom.h | 13 +- > >> board/starfive/visionfive2/spl.c | 3 + > >> .../visionfive2/starfive_visionfive2.c | 2 + > >> .../visionfive2/visionfive2-i2c-eeprom.c | 64 ++++--- > >> configs/starfive_visionfive2_defconfig | 2 +- > >> drivers/pci/pcie_starfive_jh7110.c | 8 + > >> .../src/riscv/starfive/jh7110-common.dtsi | 22 --- > >> .../jh7110-deepcomputing-fml13v01.dts | 49 ++++++ > >> .../src/riscv/starfive/jh7110-milkv-mars.dts | 49 ++++++ > >> .../riscv/starfive/jh7110-pine64-star64.dts | 49 ++++++ > >> .../jh7110-starfive-visionfive-2.dtsi | 46 +++++ > >> dts/upstream/src/riscv/starfive/jh7110.dtsi | 16 -- > >> .../jh7110s-starfive-visionfive-2-lite.dts | 159 ++++++++++++++++++ > >> 14 files changed, 418 insertions(+), 66 deletions(-) create mode > >> 100644 > >> dts/upstream/src/riscv/starfive/jh7110s-starfive-visionfive-2-lite.dt > >> s > > > > Reviewed-by: Leo Yu-Chi Liang <[email protected]> > > The series has errors as it is applied: > > https://source.denx.de/u-boot/custodians/u-boot-riscv/- > /commits/master?ref_type=HEADS > > For example: > > https://source.denx.de/u-boot/custodians/u-boot-riscv/- > /commit/4ea3acc000a793d04bae90eabfdc47be31580b87 > > - CONFIG_OF_LIST="starfive/jh7110-deepcomputing-fml13v01 > starfive/jh7110-milkv-mars starfive/jh7110-milkv-marscm-emmc > starfive/jh7110-milkv-marscm-lite starfive/jh7110-pine64-star64 > starfive/jh7110-starfive-visionfive-2-v1.2a > starfive/jh7110-starfive-visionfive-2-v1.3b" > > + CONFIG_OF_LIST="starfive/jh7110-deepcomputing-fml13v01 > starfive/jh7110-milkv-mars starfive/jh7110-milkv-marscm-emmc > starfive/jh7110-milkv-marscm-lite starfive/jh7110-pine64-star64 > starfive/jh7110-starfive-visionfive-2-v1.2a > starfive/jh7110-starfive-visionfive-2-v1.3b > configs/starfive_visionfive2_defconfig" > > The above does not agree with what I reviewed on the mailing list. I am listed > as having reviewed the content being applied. What was applied is something > completely different than what I reviewed! > > My question: > > Why are changes to the series being made when applying to the tree, who is > making those changes, and how can we get visibility into these mistakes? My > question is valid even if the errors are not intentional or through action of > some automated merge algorithm. > > This is a serious problem to associate contributors with code they did not > write > or review.
Maybe some mistakes had been made when solving the merging conflict. Let's fix it. Just change configs/starfive_visionfive2_defconfig to starfive/jh7110-starfive-visionfive-2-lite I have sent a patch to fix it. Please check. https://lore.kernel.org/all/[email protected]/ Best regards, Hal
