On 2/19/2026 10:24 AM, Siddharth Vadapalli wrote:
On Wed, 2026-02-18 at 18:57 +0530, Kumar, Udit wrote:
On 2/16/2026 3:58 PM, Siddharth Vadapalli wrote:
From: Hrushikesh Salunke <[email protected]>
Add PCIe boot documentation for J784S4-EVM including boot mode switch
settings, hardware setup requirements, endpoint configuration details
and step-by-step boot procedure.
Signed-off-by: Hrushikesh Salunke <[email protected]>
[[email protected]: simplified and documented the pcie_boot_util program]
Co-developed-by: Siddharth Vadapalli <[email protected]>
Signed-off-by: Siddharth Vadapalli <[email protected]>
---
doc/board/ti/j784s4_evm.rst | 305 ++++++++++++++++++++++++++++++++++++
1 file changed, 305 insertions(+)
diff --git a/doc/board/ti/j784s4_evm.rst b/doc/board/ti/j784s4_evm.rst
index d858dc7cdbb..fb767bedbf6 100644
--- a/doc/board/ti/j784s4_evm.rst
+++ b/doc/board/ti/j784s4_evm.rst
@@ -299,6 +299,10 @@ http://www.ti.com/lit/zip/spruj52 under the `Boot Mode
Pins` section.
- 00000000
- 01110000
+ * - PCIe
+ - 10001000
+ - 01010000
+
For SW7 and SW11, the switch state in the "ON" position = 1.
Boot Mode Pins for AM69-SK
@@ -330,6 +334,307 @@ section.
For SW2, the switch state in the "ON" position = 1.
[..]
+
+PCIe Boot Procedure
+^^^^^^^^^^^^^^^^^^^
+
overall series looks ok.
One suggestion, if you can move generic document into some common file
and include here.
then you may not need to update repeat text for each platform.
Thank you for the suggestion. I will do so in a future patch independent of
this series.
Thanks Siddharth,
For now
Reviewed-by: Udit Kumar <[email protected]>
Regards,
Siddharth.
