On 2/20/26 5:47 AM, Ronan Dalton wrote:
The following error sometimes occurs on PNY USB sticks:=> usb start starting USB... USB XHCI 1.00 WARN endpoint is halted WARN endpoint is halted usb_new_device: Cannot read configuration, skipping device 154b:6000 Bus usb3@500000: 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Note that this USB stick works correctly in Linux but not in u-boot. Work around this quirk by adding a small delay before calling usb_get_configuration_no, which it would fail in otherwise (with the error code -EINVAL). Signed-off-by: Ronan Dalton <[email protected]>
Does the following also make the USB stick work ? => setenv usb_pgood_delay 2000 => usb reset ?
