On Fri Mar 20, 2026 at 10:32 AM CDT, Robert Nelson wrote: >> > +++ b/configs/am62_pocketbeagle2_a53_defconfig >> > @@ -6,11 +6,11 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y >> > CONFIG_SPL_LIBGENERIC_SUPPORT=y >> > CONFIG_NR_DRAM_BANKS=1 >> > CONFIG_SOC_K3_AM625=y >> > -CONFIG_TARGET_AM625_A53_BEAGLEPLAY=y >> > +CONFIG_TARGET_AM62X_A53_POCKETBEAGLE2=y >> > CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y >> > CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80b80000 >> > CONFIG_DM_GPIO=y >> > -CONFIG_DEFAULT_DEVICE_TREE="ti/k3-am625-beagleplay" >> > +CONFIG_DEFAULT_DEVICE_TREE="ti/k3-am62-pocketbeagle2" >> > CONFIG_OF_LIBFDT_OVERLAY=y >> > CONFIG_DM_RESET=y >> > CONFIG_SPL_MMC=y >> > @@ -44,8 +44,6 @@ CONFIG_SPL_I2C=y >> > CONFIG_SPL_DM_MAILBOX=y >> > CONFIG_SPL_POWER_DOMAIN=y >> > CONFIG_SPL_YMODEM_SUPPORT=y >> > -CONFIG_CMD_BOOTEFI_SELFTEST=y >> > -CONFIG_CMD_NVEDIT_EFI=y >> > CONFIG_CMD_GPIO=y >> > CONFIG_CMD_GPIO_READ=y >> > CONFIG_CMD_I2C=y >> > @@ -53,6 +51,7 @@ CONFIG_CMD_MMC=y >> > CONFIG_CMD_EFIDEBUG=y >> > CONFIG_CMD_PMIC=y >> > CONFIG_CMD_REGULATOR=y >> > +CONFIG_CMD_CACHE=y >> > CONFIG_OF_CONTROL=y >> > CONFIG_SPL_OF_CONTROL=y >> > CONFIG_OF_UPSTREAM=y >> > @@ -90,10 +89,6 @@ CONFIG_MMC_SDHCI=y >> > CONFIG_MMC_SDHCI_ADMA=y >> > CONFIG_SPL_MMC_SDHCI_ADMA=y >> > CONFIG_MMC_SDHCI_AM654=y >> > -CONFIG_PHY_REALTEK=y >> > -CONFIG_PHY_TI=y >> > -CONFIG_DM_ETH_PHY=y >> > -CONFIG_TI_AM65_CPSW_NUSS=y >> > CONFIG_PHY=y >> > CONFIG_PINCTRL=y >> > CONFIG_SPL_PINCTRL=y >> > @@ -120,7 +115,8 @@ CONFIG_SYSRESET_TI_SCI=y >> > CONFIG_EXT4_WRITE=y >> > CONFIG_FS_FAT_MAX_CLUSTSIZE=16384 >> > CONFIG_LZO=y >> > -CONFIG_EFI_SET_TIME=y >> > +CONFIG_SYS_MEM_TOP_HIDE=0x4000000 >> >> Any reason why we are using TOP_HIDE here instead of just moving OPTEE >> lower in DDR like we do on the 512MiB AM6254atl EVM? > > Sorry, that is now a legacy setting before OPTEE finally got moved in > v2026.01, as this had been developed thru v2025 u-boot releases.. >
Well, it's worth noting that this change was not done in the usual way, and involves user interaction during the build beyond selecting a defconfig. https://texasinstruments.github.io/processor-sdk-doc/processor-sdk-linux-AM62X/esd/docs/master/linux/Foundational_Components_ATF.html https://git.ti.com/cgit/arago-project/meta-ti/tree/meta-ti-bsp/conf/machine/am62xxsip-evm.conf Robert, are you alright with me making the requested changes? Randolph
