On Sat, Mar 28, 2026 at 3:18 AM Marko Mäkelä <[email protected]> wrote: > > Hi Robert, > > Fri, Mar 27, 2026 at 09:15:35PM +0200, Marko Mäkelä wrote: > [snip] > >Can you help me enable the USB serial console, first for u-boot and > >subsequently for the Linux console? > > I just found your reply on this topic: > https://forum.beagleboard.org/t/pocketbeagle2-with-techlab-cape-usb-to-serial/42940 > > So, I must wire a 3.3V UART to a JST SH 1.0 mm 3 Pin connector and plug > it in on the opposite side of the USB-C connector.
Side note, here's my ci builder for u-boot.. : https://github.com/beagleboard/u-boot-pocketbeagle2 For debug, if you have access to them, grab the Raspberry PI debug cable: https://www.digikey.com/en/products/detail/raspberry-pi/SC0889/17877576 and they are available globally.. The JST will plug right in.. Regards, -- Robert Nelson https://rcn-ee.com/
