Enable automatic detection of the active A/B bank by retrieving partition GUIDs from FWU metadata.
This ensures the system correctly identifies the bootable partitions even in multi-bank scenarios, falling back to a standard bootable flag scan if the UUIDs are missing. To enable A/B bank bootup on stm32mp25 boards, add the following Kconfig options to the stm32mp25_defconfig: CONFIG_FWU_MULTI_BANK_UPDATE=y CONFIG_FWU_MDATA=y CONFIG_FWU_NUM_BANKS=2 CONFIG_FWU_NUM_IMAGES_PER_BANK=3 CONFIG_CMD_FWU_METADATA=y CONFIG_FWU_MDATA_V2=y Signed-off-by: Dario Binacchi <[email protected]> --- board/st/stm32mp2/stm32mp2.c | 25 +++++++++++++++++++++++++ include/configs/stm32mp25_st_common.h | 15 +++++++++++++++ 2 files changed, 40 insertions(+) diff --git a/board/st/stm32mp2/stm32mp2.c b/board/st/stm32mp2/stm32mp2.c index 43bc583378e6..42df750eae9b 100644 --- a/board/st/stm32mp2/stm32mp2.c +++ b/board/st/stm32mp2/stm32mp2.c @@ -208,4 +208,29 @@ void fwu_plat_get_bootidx(uint *boot_idx) *boot_idx = (readl(TAMP_FWU_BOOT_INFO_REG) >> TAMP_FWU_BOOT_IDX_OFFSET) & TAMP_FWU_BOOT_IDX_MASK; } + +int fwu_platform_hook(struct udevice *dev, struct fwu_data *data) +{ + uint boot_idx; + efi_guid_t boot_uuid, root_uuid; + const efi_guid_t boot_type_guid = PARTITION_XBOOTLDR; + const efi_guid_t root_type_guid = + PARTITION_LINUX_FILE_SYSTEM_DATA_GUID; + char uuidbuf[UUID_STR_LEN + 1]; + + fwu_plat_get_bootidx(&boot_idx); + + if (!fwu_mdata_get_image_guid(&boot_uuid, boot_type_guid, + boot_idx) && + !fwu_mdata_get_image_guid(&root_uuid, root_type_guid, + boot_idx)) { + uuid_bin_to_str(boot_uuid.b, uuidbuf, UUID_STR_FORMAT_GUID); + env_set("boot_partuuid", uuidbuf); + + uuid_bin_to_str(root_uuid.b, uuidbuf, UUID_STR_FORMAT_GUID); + env_set("root_partuuid", uuidbuf); + } + + return 0; +} #endif /* CONFIG_FWU_MULTI_BANK_UPDATE */ diff --git a/include/configs/stm32mp25_st_common.h b/include/configs/stm32mp25_st_common.h index cb679eb1be22..0b0267ae99b0 100644 --- a/include/configs/stm32mp25_st_common.h +++ b/include/configs/stm32mp25_st_common.h @@ -8,7 +8,22 @@ #ifndef __CONFIG_STM32MP25_ST_COMMON_H__ #define __CONFIG_STM32MP25_ST_COMMON_H__ +#ifdef CONFIG_FWU_MULTI_BANK_UPDATE +#define SCAN_DEV_FOR_BOOT_PARTS \ + "setenv devplist; " \ + "env exists boot_partuuid && " \ + "part number ${devtype} ${devnum} ${boot_partuuid} devplist; " \ + "env exists devplist || " \ + "part list ${devtype} ${devnum} -bootable devplist; " + +#define ST_STM32MP25_FWU_ENV \ + "altbootcmd=${bootcmd}\0" +#else +#define ST_STM32MP25_FWU_ENV +#endif + #define STM32MP_BOARD_EXTRA_ENV \ + ST_STM32MP25_FWU_ENV \ "usb_pgood_delay=2000\0" \ "console=ttySTM0\0" -- 2.43.0
