Add the magic numbers i got from Bryan at ti.. > Here are the git revisions that I used of the above directories: > > u-boot: your ef03e35488377a32cdd4f76d1a03ef7f60c798ef > trusted-firmware-a: 8dae0862c502e08568a61a1050091fa9357f1240 (Mar 23) > optee_os: 1c0c7c06563e9be0ebc55b47cdb71422b02906a6 (Mar 23) > ti-linux-firmware: 12.00.00.07 (Mar 20)
I'm just on tagged releases, will bump later.. > > For podman run, I am bind-mounting the source directory tree using the > :O (overlay) option. So, even though I appear to run "in-source" build, > the original source directories outside the container will remain > unchanged. The files tiboot3.bin, tispl.bin, and u-boot.img are > generated by running the following commands inside the container: > > make -j$(nproc) -C trusted-firmware-a CROSS_COMPILE=aarch64-linux-gnu- \ > ARCH=aarch64 PLAT=k3 SPD=opteed TARGET_BOARD=lite TFA: add: `K3_USART=0x6 BL32_BASE=0x80080000 PRELOADED_BL33_BASE=0x82000000` > > make -j$(nproc) -C optee_os CROSS_COMPILE=arm-linux-gnueabihf- \ > CROSS_COMPILE64=aarch64-linux-gnu- CFG_ARM64_core=y CFG_WITH_SOFTWARE_PRNG=y \ > PLATFORM=k3-am62x optee add: `CFG_CONSOLE_UART=0x6 CFG_TZDRAM_START=0x80080000 ` CFG_WITH_SOFTWARE_PRNG can be removed > > cd u-boot > make am62_pocketbeagle2_r5_defconfig && > make -j$(nproc) CROSS_COMPILE=arm-linux-gnueabihf- \ > BINMAN_INDIRS=$(pwd)/../ti-linux-firmware && > > make am62_pocketbeagle2_a53_defconfig && > make -j$(nproc) CROSS_COMPILE=aarch64-linux-gnu- \ > BINMAN_INDIRS=$(pwd)/../ti-linux-firmware \ > BL31=$(pwd)/../trusted-firmware-a/build/k3/lite/release/bl31.bin \ > TEE=$(pwd)/../optee_os/out/arm-plat-k3/core/tee-raw.bin > > Based on reviewing your build script, I revised the above by adding > TFA_EXTRA_ARGS=K3_USART_0x6 to trusted-firmware-a and > CFG_CONSOLE_UART=0x6 to optee_os, but they made no difference. > Furthermore, I replaced tee-raw.bin with tee-pager_v2.bin: no change. > > What am I doing wrong here? > > With best regards, > > Marko -- Robert Nelson https://rcn-ee.com/
