Dear Mike Williams, In message <[email protected]> you wrote: > This code has been changed to read the CPU speed information from the > CPR registers rather than the bootstrap registers. This is useful when > changing the clock speed to something other than the default on boot. ... > --- a/arch/powerpc/include/asm/ppc460ex_gt.h > +++ b/arch/powerpc/include/asm/ppc460ex_gt.h > @@ -211,11 +211,24 @@ > #define PLLSYS0_PERCLK_DIV_MASK 0x03000000 /* Peripheral Clk Divisor */ > #define PLLSYS0_SEL_MASK 0x18000000 /* 0 = PLL, 1 = PerClk */ > > -#define CPR0_ICFG_RLI_MASK 0x80000000 > +#define CPR0_PLBED 0x00000080 /* PLL PLB Ealry Clock Divider */
s/Ealry/Early/ And please use TABs for vertical alignment. > +#define PERDV_MASK 0x03000000 /* Periferal Clock Divisor */ s/Periferal/Peripheral/ Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] Hiring experienced unix people is like a built-in filter against idiots. Hiring experienced NT people provides no such guarantee. -- Miguel Cruz in [email protected] _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
