The RDB doesn't support NAND boot at all, remove the config for it.
Apparently, it was introduced by commit dd84058d24ff ("kconfig: add
board Kconfig and defconfig files") which ran some scripts. Maybe that
script was wrong or the source boards.cfg was wrong. In any case, there
is no NAND flash on the RDB.Signed-off-by: Michael Walle <[email protected]> --- configs/P2041RDB_NAND_defconfig | 117 -------------------------------- 1 file changed, 117 deletions(-) delete mode 100644 configs/P2041RDB_NAND_defconfig diff --git a/configs/P2041RDB_NAND_defconfig b/configs/P2041RDB_NAND_defconfig deleted file mode 100644 index 1bef841990f..00000000000 --- a/configs/P2041RDB_NAND_defconfig +++ /dev/null @@ -1,117 +0,0 @@ -CONFIG_PPC=y -CONFIG_TEXT_BASE=0xFFF40000 -CONFIG_SYS_MALLOC_LEN=0x100000 -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_ENV_SIZE=0x20000 -CONFIG_ENV_OFFSET=0xE0000 -CONFIG_DEFAULT_DEVICE_TREE="p2041rdb" -CONFIG_SYS_MONITOR_LEN=786432 -CONFIG_MPC85xx=y -CONFIG_SYS_INIT_RAM_LOCK=y -CONFIG_SYS_SRIO=y -CONFIG_SRIO1=y -CONFIG_SRIO2=y -CONFIG_SRIO_PCIE_BOOT_MASTER=y -CONFIG_TARGET_P2041RDB=y -CONFIG_MPC85XX_HAVE_RESET_VECTOR=y -CONFIG_ENABLE_36BIT_PHYS=y -CONFIG_SYS_BOOK3E_HV=y -CONFIG_SYS_CACHE_STASHING=y -CONFIG_USE_UBOOTPATH=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_SYS_FSL_NUM_CC_PLLS=2 -CONFIG_MP=y -CONFIG_DYNAMIC_SYS_CLK_FREQ=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_RAMBOOT_PBL=y -CONFIG_SYS_FSL_PBL_PBI="board/nxp/p2041rdb/pbi.cfg" -CONFIG_SYS_FSL_PBL_RCW="board/nxp/p2041rdb/rcw_p2041rdb.cfg" -CONFIG_BOOTDELAY=10 -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_USE_BOOTCOMMAND=y -CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr" -CONFIG_SYS_PBSIZE=276 -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_ID_EEPROM=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_GREPENV=y -CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 -CONFIG_CMD_DM=y -CONFIG_CMD_I2C=y -CONFIG_LOADS_ECHO=y -CONFIG_SYS_LOADS_BAUD_CHANGE=y -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_NAND=y -CONFIG_ENV_RELOC_GD_ENV_ADDR=y -CONFIG_USE_BOOTFILE=y -CONFIG_BOOTFILE="uImage" -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="FM1@DTSEC1" -CONFIG_USE_ROOTPATH=y -CONFIG_FSL_SATA_V2=y -CONFIG_SYS_SATA_MAX_DEVICE=2 -CONFIG_FSL_CAAM=y -CONFIG_SYS_BR0_PRELIM_BOOL=y -CONFIG_SYS_BR0_PRELIM=0xFFA00C21 -CONFIG_SYS_OR0_PRELIM=0xFFFC0796 -CONFIG_SYS_BR1_PRELIM_BOOL=y -CONFIG_SYS_BR1_PRELIM=0xE8001001 -CONFIG_SYS_OR1_PRELIM=0xF8000F85 -CONFIG_SYS_BR3_PRELIM_BOOL=y -CONFIG_SYS_BR3_PRELIM=0xFFDF0801 -CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7 -CONFIG_DM_I2C=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_I2C_FSL=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x50 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_EMPTY_INFO=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_FLASH_QUIET_TEST=y -CONFIG_SYS_MAX_FLASH_SECT=1024 -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_FSL_ELBC=y -CONFIG_DM_SPI_FLASH=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHYLIB=y -CONFIG_PHYLIB_10G=y -CONFIG_PHY_TERANETICS=y -CONFIG_PHY_VITESSE=y -CONFIG_DM_MDIO=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_SYS_FMAN_FW_ADDR=0x100000 -CONFIG_MII=y -CONFIG_PCIE_FSL=y -CONFIG_SYS_QE_FMAN_FW_IN_NAND=y -CONFIG_DM_SERIAL=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_EHCI_FSL=y -CONFIG_USB_MAX_CONTROLLER_COUNT=2 -CONFIG_USB_STORAGE=y -CONFIG_ADDR_MAP=y -CONFIG_SYS_NUM_ADDR_MAP=64 -CONFIG_POST=y -- 2.47.3
