Sync Linux kernel dwc3 changes from v4.4 to v4.5. The following files are preserved accross the import: Makefile Kconfig dwc3-meson-g12a.c dwc3-meson-gxl.c dwc3-omap.c dwc3-uniphier.c dwc3-generic.h dwc3-generic.c dwc3-generic-sti.c dwc3-layerscape.c ti_usb_phy.c
Skipping unused files: debugfs.c drd.c dwc3-exynos.c dwc3-haps.c dwc3-imx8mp.c dwc3-keystone.c dwc3-octeon.c dwc3-of-simple.c dwc3-pci.c dwc3-qcom.c dwc3-qcom-legacy.c dwc3-rtk.c dwc3-st.c dwc3-xilinx.c host.c trace.c trace.h ulpi.c Note that this is a raw import and doesn't build. A fixup commit at the end of the series fixes that. List of commits: git log --oneline v4.4..v4.5 Commits imported: c450960187f4 usb: dwc3: Fix assignment of EP transfer resources 6a4290cc28be usb: dwc3: gadget: set the OTG flag in dwc3 gadget driver. 5072cfc40a80 usb: dwc3: of-simple: fix build warning on !PM d9261898a4b2 usb: dwc3: gadget: don't send extra ZLP 95ca961c758c usb: dwc3: gadget: pass a condition to dev_WARN_ONCE() 46a01427e969 usb: dwc3: trace: show request flags 04c03d10e507 usb: dwc3: gadget: handle request->zero b084662776be usb: dwc3: remove dwc3-qcom in favor of dwc3-of-simple 16adc674d0d6 usb: dwc3: add generic OF glue layer b5d335e5ea6a usb: dwc3: ep0: fix setup_packet_pending initialization ac7bdcc1b3ad usb: dwc3: gadget: simplify next_request() return check acc38c4970ca usb: dwc3: ep0: purge dev_dbg() calls 1407bf13e3bf usb: dwc3: core: purge dev_dbg() calls ec5e795cdefb usb: dwc3: gadget: purge dev_dbg() calls bb423984c28e usb: dwc3: gadget: simplify dwc3_gadget_ep_queue() Signed-off-by: Jens Wiklander <[email protected]> --- drivers/usb/dwc3/core.c | 8 +- drivers/usb/dwc3/core.h | 4 +- drivers/usb/dwc3/ep0.c | 17 ++-- drivers/usb/dwc3/gadget.c | 204 ++++++++++++++++++++++++++------------ 4 files changed, 157 insertions(+), 76 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 22b4797383cd..de5e01f41bc2 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -272,7 +272,8 @@ static int dwc3_event_buffers_setup(struct dwc3 *dwc) for (n = 0; n < dwc->num_event_buffers; n++) { evt = dwc->ev_buffs[n]; - dev_dbg(dwc->dev, "Event buf %p dma %08llx length %d\n", + dwc3_trace(trace_dwc3_core, + "Event buf %p dma %08llx length %d\n", evt->buf, (unsigned long long) evt->dma, evt->length); @@ -608,12 +609,13 @@ static int dwc3_core_init(struct dwc3 *dwc) reg |= DWC3_GCTL_GBLHIBERNATIONEN; break; default: - dev_dbg(dwc->dev, "No power optimization available\n"); + dwc3_trace(trace_dwc3_core, "No power optimization available\n"); } /* check if current dwc3 is on simulation board */ if (dwc->hwparams.hwparams6 & DWC3_GHWPARAMS6_EN_FPGA) { - dev_dbg(dwc->dev, "it is on FPGA board\n"); + dwc3_trace(trace_dwc3_core, + "running on FPGA platform\n"); dwc->is_fpga = true; } diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 36f1cb74588c..e4f8b90d9627 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -37,6 +37,7 @@ #define DWC3_MSG_MAX 500 /* Global constants */ +#define DWC3_ZLP_BUF_SIZE 1024 /* size of a superspeed bulk */ #define DWC3_EP0_BOUNCE_SIZE 512 #define DWC3_ENDPOINTS_NUM 32 #define DWC3_XHCI_RESOURCES_NUM 2 @@ -647,6 +648,7 @@ struct dwc3_scratchpad_array { * @ctrl_req: usb control request which is used for ep0 * @ep0_trb: trb which is used for the ctrl_req * @ep0_bounce: bounce buffer for ep0 + * @zlp_buf: used when request->zero is set * @setup_buf: used while precessing STD USB requests * @ctrl_req_addr: dma address of ctrl_req * @ep0_trb: dma address of ep0_trb @@ -734,6 +736,7 @@ struct dwc3 { struct usb_ctrlrequest *ctrl_req; struct dwc3_trb *ep0_trb; void *ep0_bounce; + void *zlp_buf; void *scratchbuf; u8 *setup_buf; dma_addr_t ctrl_req_addr; @@ -853,7 +856,6 @@ struct dwc3 { unsigned pullups_connected:1; unsigned resize_fifos:1; unsigned setup_packet_pending:1; - unsigned start_config_issued:1; unsigned three_stage_setup:1; unsigned usb3_lpm_capable:1; diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 5320e939e090..8d6b75c2f53b 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -555,7 +555,6 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) int ret; u32 reg; - dwc->start_config_issued = false; cfg = le16_to_cpu(ctrl->wValue); switch (state) { @@ -737,10 +736,6 @@ static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_ISOCH_DELAY"); ret = dwc3_ep0_set_isoch_delay(dwc, ctrl); break; - case USB_REQ_SET_INTERFACE: - dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_INTERFACE"); - dwc->start_config_issued = false; - /* Fall through */ default: dwc3_trace(trace_dwc3_ep0, "Forwarding to gadget driver"); ret = dwc3_ep0_delegate_req(dwc, ctrl); @@ -817,6 +812,8 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc, status = DWC3_TRB_SIZE_TRBSTS(trb->size); if (status == DWC3_TRBSTS_SETUP_PENDING) { + dwc->setup_packet_pending = true; + dwc3_trace(trace_dwc3_ep0, "Setup Pending received"); if (r) @@ -916,8 +913,10 @@ static void dwc3_ep0_complete_status(struct dwc3 *dwc, } status = DWC3_TRB_SIZE_TRBSTS(trb->size); - if (status == DWC3_TRBSTS_SETUP_PENDING) + if (status == DWC3_TRBSTS_SETUP_PENDING) { + dwc->setup_packet_pending = true; dwc3_trace(trace_dwc3_ep0, "Setup Pending received"); + } dwc->ep0state = EP0_SETUP_PHASE; dwc3_ep0_out_start(dwc); @@ -971,7 +970,7 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, ret = usb_gadget_map_request(&dwc->gadget, &req->request, dep->number); if (ret) { - dev_dbg(dwc->dev, "failed to map request\n"); + dwc3_trace(trace_dwc3_ep0, "failed to map request\n"); return; } @@ -999,7 +998,7 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, ret = usb_gadget_map_request(&dwc->gadget, &req->request, dep->number); if (ret) { - dev_dbg(dwc->dev, "failed to map request\n"); + dwc3_trace(trace_dwc3_ep0, "failed to map request\n"); return; } @@ -1063,8 +1062,6 @@ static void dwc3_ep0_end_control_data(struct dwc3 *dwc, struct dwc3_ep *dep) static void dwc3_ep0_xfernotready(struct dwc3 *dwc, const struct dwc3_event_depevt *event) { - dwc->setup_packet_pending = true; - switch (event->status) { case DEPEVT_STATUS_CONTROL_DATA: dwc3_trace(trace_dwc3_ep0, "Control Data"); diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index a58376fd65fe..2363bad45af8 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -265,9 +265,6 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req, usb_gadget_unmap_request(&dwc->gadget, &req->request, req->direction); - dev_dbg(dwc->dev, "request %p from %s completed %d/%d ===> %d\n", - req, dep->name, req->request.actual, - req->request.length, status); trace_dwc3_gadget_giveback(req); spin_unlock(&dwc->lock); @@ -388,24 +385,66 @@ static void dwc3_free_trb_pool(struct dwc3_ep *dep) dep->trb_pool_dma = 0; } +static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep); + +/** + * dwc3_gadget_start_config - Configure EP resources + * @dwc: pointer to our controller context structure + * @dep: endpoint that is being enabled + * + * The assignment of transfer resources cannot perfectly follow the + * data book due to the fact that the controller driver does not have + * all knowledge of the configuration in advance. It is given this + * information piecemeal by the composite gadget framework after every + * SET_CONFIGURATION and SET_INTERFACE. Trying to follow the databook + * programming model in this scenario can cause errors. For two + * reasons: + * + * 1) The databook says to do DEPSTARTCFG for every SET_CONFIGURATION + * and SET_INTERFACE (8.1.5). This is incorrect in the scenario of + * multiple interfaces. + * + * 2) The databook does not mention doing more DEPXFERCFG for new + * endpoint on alt setting (8.1.6). + * + * The following simplified method is used instead: + * + * All hardware endpoints can be assigned a transfer resource and this + * setting will stay persistent until either a core reset or + * hibernation. So whenever we do a DEPSTARTCFG(0) we can go ahead and + * do DEPXFERCFG for every hardware endpoint as well. We are + * guaranteed that there are as many transfer resources as endpoints. + * + * This function is called for each endpoint when it is being enabled + * but is triggered only when called for EP0-out, which always happens + * first, and which should only happen in one of the above conditions. + */ static int dwc3_gadget_start_config(struct dwc3 *dwc, struct dwc3_ep *dep) { struct dwc3_gadget_ep_cmd_params params; u32 cmd; + int i; + int ret; + + if (dep->number) + return 0; memset(¶ms, 0x00, sizeof(params)); + cmd = DWC3_DEPCMD_DEPSTARTCFG; - if (dep->number != 1) { - cmd = DWC3_DEPCMD_DEPSTARTCFG; - /* XferRscIdx == 0 for ep0 and 2 for the remaining */ - if (dep->number > 1) { - if (dwc->start_config_issued) - return 0; - dwc->start_config_issued = true; - cmd |= DWC3_DEPCMD_PARAM(2); - } + ret = dwc3_send_gadget_ep_cmd(dwc, 0, cmd, ¶ms); + if (ret) + return ret; - return dwc3_send_gadget_ep_cmd(dwc, 0, cmd, ¶ms); + for (i = 0; i < DWC3_ENDPOINTS_NUM; i++) { + struct dwc3_ep *dep = dwc->eps[i]; + + if (!dep) + continue; + + ret = dwc3_gadget_set_xfer_resource(dwc, dep); + if (ret) + return ret; } return 0; @@ -519,10 +558,6 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, struct dwc3_trb *trb_st_hw; struct dwc3_trb *trb_link; - ret = dwc3_gadget_set_xfer_resource(dwc, dep); - if (ret) - return ret; - dep->endpoint.desc = desc; dep->comp_desc = comp_desc; dep->type = usb_endpoint_type(desc); @@ -664,11 +699,10 @@ static int dwc3_gadget_ep_enable(struct usb_ep *ep, dep = to_dwc3_ep(ep); dwc = dep->dwc; - if (dep->flags & DWC3_EP_ENABLED) { - dev_WARN_ONCE(dwc->dev, true, "%s is already enabled\n", - dep->name); + if (dev_WARN_ONCE(dwc->dev, dep->flags & DWC3_EP_ENABLED, + "%s is already enabled\n", + dep->name)) return 0; - } spin_lock_irqsave(&dwc->lock, flags); ret = __dwc3_gadget_ep_enable(dep, desc, ep->comp_desc, false, false); @@ -692,11 +726,10 @@ static int dwc3_gadget_ep_disable(struct usb_ep *ep) dep = to_dwc3_ep(ep); dwc = dep->dwc; - if (!(dep->flags & DWC3_EP_ENABLED)) { - dev_WARN_ONCE(dwc->dev, true, "%s is already disabled\n", - dep->name); + if (dev_WARN_ONCE(dwc->dev, !(dep->flags & DWC3_EP_ENABLED), + "%s is already disabled\n", + dep->name)) return 0; - } spin_lock_irqsave(&dwc->lock, flags); ret = __dwc3_gadget_ep_disable(dep); @@ -985,8 +1018,6 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param, cmd |= DWC3_DEPCMD_PARAM(cmd_param); ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, ¶ms); if (ret < 0) { - dev_dbg(dwc->dev, "failed to send STARTTRANSFER command\n"); - /* * FIXME we need to iterate over the list of requests * here and stop, unmap, free and del each of the linked @@ -1044,6 +1075,20 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) struct dwc3 *dwc = dep->dwc; int ret; + if (!dep->endpoint.desc) { + dwc3_trace(trace_dwc3_gadget, + "trying to queue request %p to disabled %s\n", + &req->request, dep->endpoint.name); + return -ESHUTDOWN; + } + + if (WARN(req->dep != dep, "request %p belongs to '%s'\n", + &req->request, req->dep->name)) { + dwc3_trace(trace_dwc3_gadget, "request %p belongs to '%s'\n", + &req->request, req->dep->name); + return -EINVAL; + } + req->request.actual = 0; req->request.status = -EINPROGRESS; req->direction = dep->direction; @@ -1141,7 +1186,8 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) out: if (ret && ret != -EBUSY) - dev_dbg(dwc->dev, "%s: failed to kick transfers\n", + dwc3_trace(trace_dwc3_gadget, + "%s: failed to kick transfers\n", dep->name); if (ret == -EBUSY) ret = 0; @@ -1149,6 +1195,32 @@ out: return ret; } +static void __dwc3_gadget_ep_zlp_complete(struct usb_ep *ep, + struct usb_request *request) +{ + dwc3_gadget_ep_free_request(ep, request); +} + +static int __dwc3_gadget_ep_queue_zlp(struct dwc3 *dwc, struct dwc3_ep *dep) +{ + struct dwc3_request *req; + struct usb_request *request; + struct usb_ep *ep = &dep->endpoint; + + dwc3_trace(trace_dwc3_gadget, "queueing ZLP\n"); + request = dwc3_gadget_ep_alloc_request(ep, GFP_ATOMIC); + if (!request) + return -ENOMEM; + + request->length = 0; + request->buf = dwc->zlp_buf; + request->complete = __dwc3_gadget_ep_zlp_complete; + + req = to_dwc3_request(request); + + return __dwc3_gadget_ep_queue(dep, req); +} + static int dwc3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request, gfp_t gfp_flags) { @@ -1161,22 +1233,18 @@ static int dwc3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request, int ret; spin_lock_irqsave(&dwc->lock, flags); - if (!dep->endpoint.desc) { - dev_dbg(dwc->dev, "trying to queue request %p to disabled %s\n", - request, ep->name); - ret = -ESHUTDOWN; - goto out; - } - - if (WARN(req->dep != dep, "request %p belongs to '%s'\n", - request, req->dep->name)) { - ret = -EINVAL; - goto out; - } - ret = __dwc3_gadget_ep_queue(dep, req); -out: + /* + * Okay, here's the thing, if gadget driver has requested for a ZLP by + * setting request->zero, instead of doing magic, we will just queue an + * extra usb_request ourselves so that it gets handled the same way as + * any other request. + */ + if (ret == 0 && request->zero && request->length && + (request->length % ep->maxpacket == 0)) + ret = __dwc3_gadget_ep_queue_zlp(dwc, dep); + spin_unlock_irqrestore(&dwc->lock, flags); return ret; @@ -1246,7 +1314,8 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol) if (!protocol && ((dep->direction && dep->flags & DWC3_EP_BUSY) || (!list_empty(&dep->req_queued) || !list_empty(&dep->request_list)))) { - dev_dbg(dwc->dev, "%s: pending request, cannot halt\n", + dwc3_trace(trace_dwc3_gadget, + "%s: pending request, cannot halt\n", dep->name); return -EAGAIN; } @@ -1373,7 +1442,7 @@ static int dwc3_gadget_wakeup(struct usb_gadget *g) speed = reg & DWC3_DSTS_CONNECTSPD; if (speed == DWC3_DSTS_SUPERSPEED) { - dev_dbg(dwc->dev, "no wakeup on SuperSpeed\n"); + dwc3_trace(trace_dwc3_gadget, "no wakeup on SuperSpeed\n"); ret = -EINVAL; goto out; } @@ -1385,8 +1454,9 @@ static int dwc3_gadget_wakeup(struct usb_gadget *g) case DWC3_LINK_STATE_U3: /* in HS, means SUSPEND */ break; default: - dev_dbg(dwc->dev, "can't wakeup from link state %d\n", - link_state); + dwc3_trace(trace_dwc3_gadget, + "can't wakeup from '%s'\n", + dwc3_gadget_link_string(link_state)); ret = -EINVAL; goto out; } @@ -1604,8 +1674,6 @@ static int dwc3_gadget_start(struct usb_gadget *g, } dwc3_writel(dwc->regs, DWC3_DCFG, reg); - dwc->start_config_issued = false; - /* Start with SuperSpeed Default */ dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); @@ -1825,7 +1893,8 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep, if (count) { trb_status = DWC3_TRB_SIZE_TRBSTS(trb->size); if (trb_status == DWC3_TRBSTS_MISSED_ISOC) { - dev_dbg(dwc->dev, "incomplete IN transfer %s\n", + dwc3_trace(trace_dwc3_gadget, + "%s: incomplete IN transfer\n", dep->name); /* * If missed isoc occurred and there is @@ -1887,10 +1956,9 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep, do { req = next_request(&dep->req_queued); - if (!req) { - WARN_ON_ONCE(1); + if (WARN_ON_ONCE(!req)) return 1; - } + i = 0; do { slot = req->start_slot + i; @@ -2004,7 +2072,8 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc, dep->resource_index = 0; if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) { - dev_dbg(dwc->dev, "%s is an Isochronous endpoint\n", + dwc3_trace(trace_dwc3_gadget, + "%s is an Isochronous endpoint\n", dep->name); return; } @@ -2031,7 +2100,8 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc, if (!ret || ret == -EBUSY) return; - dev_dbg(dwc->dev, "%s: failed to kick transfers\n", + dwc3_trace(trace_dwc3_gadget, + "%s: failed to kick transfers\n", dep->name); } @@ -2053,11 +2123,12 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc, case DEPEVT_STREAMEVT_NOTFOUND: /* FALLTHROUGH */ default: - dev_dbg(dwc->dev, "Couldn't find suitable stream\n"); + dwc3_trace(trace_dwc3_gadget, + "unable to find suitable stream\n"); } break; case DWC3_DEPEVT_RXTXFIFOEVT: - dev_dbg(dwc->dev, "%s FIFO Overrun\n", dep->name); + dwc3_trace(trace_dwc3_gadget, "%s FIFO Overrun\n", dep->name); break; case DWC3_DEPEVT_EPCMDCMPLT: dwc3_trace(trace_dwc3_gadget, "Endpoint Command Complete"); @@ -2202,7 +2273,6 @@ static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc) dwc3_writel(dwc->regs, DWC3_DCTL, reg); dwc3_disconnect_gadget(dwc); - dwc->start_config_issued = false; dwc->gadget.speed = USB_SPEED_UNKNOWN; dwc->setup_packet_pending = false; @@ -2230,8 +2300,8 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc) * * Our suggested workaround is to follow the Disconnect * Event steps here, instead, based on a setup_packet_pending - * flag. Such flag gets set whenever we have a XferNotReady - * event on EP0 and gets cleared on XferComplete for the + * flag. Such flag gets set whenever we have a SETUP_PENDING + * status for EP0 TRBs and gets cleared on XferComplete for the * same endpoint. * * Refers to: @@ -2253,7 +2323,6 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc) dwc3_stop_active_transfers(dwc); dwc3_clear_stall_all_ep(dwc); - dwc->start_config_issued = false; /* Reset device address to zero */ reg = dwc3_readl(dwc->regs, DWC3_DCFG); @@ -2744,10 +2813,17 @@ int dwc3_gadget_init(struct dwc3 *dwc) goto err3; } + dwc->zlp_buf = kzalloc(DWC3_ZLP_BUF_SIZE, GFP_KERNEL); + if (!dwc->zlp_buf) { + ret = -ENOMEM; + goto err4; + } + dwc->gadget.ops = &dwc3_gadget_ops; dwc->gadget.speed = USB_SPEED_UNKNOWN; dwc->gadget.sg_supported = true; dwc->gadget.name = "dwc3-gadget"; + dwc->gadget.is_otg = dwc->dr_mode == USB_DR_MODE_OTG; /* * FIXME We might be setting max_speed to <SUPER, however versions @@ -2785,16 +2861,19 @@ int dwc3_gadget_init(struct dwc3 *dwc) ret = dwc3_gadget_init_endpoints(dwc); if (ret) - goto err4; + goto err5; ret = usb_add_gadget_udc(dwc->dev, &dwc->gadget); if (ret) { dev_err(dwc->dev, "failed to register udc\n"); - goto err4; + goto err5; } return 0; +err5: + kfree(dwc->zlp_buf); + err4: dwc3_gadget_free_endpoints(dwc); dma_free_coherent(dwc->dev, DWC3_EP0_BOUNCE_SIZE, @@ -2827,6 +2906,7 @@ void dwc3_gadget_exit(struct dwc3 *dwc) dwc->ep0_bounce, dwc->ep0_bounce_addr); kfree(dwc->setup_buf); + kfree(dwc->zlp_buf); dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb), dwc->ep0_trb, dwc->ep0_trb_addr); -- 2.43.0
