Add target to generate u-boot-elf.scif for R-Car Gen5 Cortex-M33 RSIP core. The resulting .scif SREC file can be loaded using the SCIF loader to start U-Boot on the RSIP core.
Signed-off-by: Marek Vasut <[email protected]> --- Cc: Hai Pham <[email protected]> Cc: Nobuhiro Iwamatsu <[email protected]> Cc: Tom Rini <[email protected]> Cc: [email protected] --- arch/arm/mach-renesas/Makefile | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm/mach-renesas/Makefile b/arch/arm/mach-renesas/Makefile index 652a392ba6f..e3133668e13 100644 --- a/arch/arm/mach-renesas/Makefile +++ b/arch/arm/mach-renesas/Makefile @@ -40,6 +40,13 @@ else srec_cat_le_cmd := "-l-e-constant" endif +ifneq ($(CONFIG_RCAR_GEN5),) +quiet_cmd_srec_cat = SRECCAT $@ + cmd_srec_cat = srec_cat -output $@ -M 8 $< -M 8 \ + -Output_Block_Size 16 \ + -generate 0x18402010 0x18402014 $(srec_cat_le_cmd) $(CONFIG_SYS_UBOOT_START) 4 \ + -generate 0x18402014 0x18402018 $(srec_cat_le_cmd) 0x1ef000 4 +else ifneq ($(CONFIG_RCAR_GEN4),) quiet_cmd_srec_cat = SRECCAT $@ cmd_srec_cat = srec_cat -output $@ -M 8 $< -M 8 \ @@ -106,10 +113,14 @@ quiet_cmd_srec_cat = SRECCAT $@ -generate 0xe6301264 0xe6301268 $(srec_cat_le_cmd) $2 4 endif endif +endif spl/u-boot-spl.scif: spl/u-boot-spl.srec spl/u-boot-spl.bin $(call cmd,srec_cat,$(shell wc -c spl/u-boot-spl.bin | awk '{printf("0x%08x\n",$$1)}')) +u-boot-elf.scif: u-boot-elf.srec u-boot.bin + $(call cmd,srec_cat,$(shell wc -c u-boot-dtb.bin | awk '{printf("0x%08x\n",$$1)}')) + # if srec_cat is present build u-boot-spl.scif by default has_srec_cat = $(call try-run,srec_cat -VERSion,y,n) INPUTS-$(has_srec_cat) += u-boot-spl.scif -- 2.53.0
