The SPI IP in the Allwinner A523 is mostly compatible to the later generation used in other Allwinner SoCs, at least as far as the SPL driver is concerned.
Just add the pinmux configuration for SPI0 on PortC, as used by the BROM. This enables SPI (NOR) boot on A523/A527/T527 boards. Signed-off-by: Andre Przywara <[email protected]> --- arch/arm/mach-sunxi/spl_spi_sunxi.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-sunxi/spl_spi_sunxi.c b/arch/arm/mach-sunxi/spl_spi_sunxi.c index 905a7db2a77..25878026891 100644 --- a/arch/arm/mach-sunxi/spl_spi_sunxi.c +++ b/arch/arm/mach-sunxi/spl_spi_sunxi.c @@ -113,6 +113,8 @@ static void spi0_pinmux_setup(unsigned int pin_function) const u16 spi0_pc_pins[4] = { #if IS_ENABLED(CONFIG_MACH_SUN8I_R528) SUNXI_GPC(2), SUNXI_GPC(3), SUNXI_GPC(4), SUNXI_GPC(5) +#elif IS_ENABLED(CONFIG_MACH_SUN55I_A523) + SUNXI_GPC(2), SUNXI_GPC(3), SUNXI_GPC(4), SUNXI_GPC(12) #elif IS_ENABLED(CONFIG_MACH_SUN50I_H616) SUNXI_GPC(0), SUNXI_GPC(2), SUNXI_GPC(3), SUNXI_GPC(4) #elif IS_ENABLED(CONFIG_MACH_SUN50I_H6) @@ -250,7 +252,8 @@ static void spi0_init(void) unsigned int pin_function = SUNXI_GPC_SPI0; if (IS_ENABLED(CONFIG_MACH_SUN50I) || - IS_ENABLED(CONFIG_SUN50I_GEN_H6)) + IS_ENABLED(CONFIG_SUN50I_GEN_H6) || + IS_ENABLED(CONFIG_MACH_SUN55I_A523)) pin_function = SUN50I_GPC_SPI0; else if (IS_ENABLED(CONFIG_MACH_SUNIV) || IS_ENABLED(CONFIG_MACH_SUN8I_R528)) -- 2.46.4
