Hi Simon, Am 28.07.2011 11:22, schrieb Simon Schwarz: > Moves the early UART clock setup setup_clocks_for_console() from > preloader_console_init() to s_init() of OMAP4.
I recommend putting this in your 'devkit8000 nand_spl support' series before the current '2/5 omap-common: add nand_spl support' and remove the '#ifdef CONFIG_OMAP34XX' in that patch. Albert how do you think about this? > Signed-off-by: Simon Schwarz <simonschwarz...@gmail.com> > --- > arch/arm/cpu/armv7/omap-common/spl.c | 1 - > arch/arm/cpu/armv7/omap4/board.c | 1 + > 2 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/arch/arm/cpu/armv7/omap-common/spl.c > b/arch/arm/cpu/armv7/omap-common/spl.c > index d177652..d380b3e 100644 > --- a/arch/arm/cpu/armv7/omap-common/spl.c > +++ b/arch/arm/cpu/armv7/omap-common/spl.c > @@ -259,7 +259,6 @@ void preloader_console_init(void) I recommend adding some comment for preloader_console_init() saying 'this requires UART clocks to be enabled before' in this patch. > gd->flags |= GD_FLG_RELOC; > gd->baudrate = CONFIG_BAUDRATE; > > - setup_clocks_for_console(); > serial_init(); /* serial communications setup */ > > /* Avoid a second "U-Boot" coming from this string */ regards Andreas Bießmann _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot