Hi Biswapriyo, On 12/05/2026 16:44, Biswapriyo Nath wrote: > This command helps to shutdown the device directly from serial command > line. Or, the phone has to be booted into recovery mode to power off.
Awesome, this has been sorely needed :D Would you mind spinning a v2 and moving the config option to qcom_defconfig so the command is available on all boards? (in case you didn't know, b4 trailers -U will pull in the reviewed-by tags) Thanks, > > Signed-off-by: Biswapriyo Nath <[email protected]> > --- > board/qualcomm/qcom-phone.config | 1 + > board/qualcomm/qcom-phone.env | 1 + > 2 files changed, 2 insertions(+) > > diff --git a/board/qualcomm/qcom-phone.config > b/board/qualcomm/qcom-phone.config > index d24094eefddb..e4727fa8b930 100644 > --- a/board/qualcomm/qcom-phone.config > +++ b/board/qualcomm/qcom-phone.config > @@ -5,6 +5,7 @@ CONFIG_PANIC_HANG=y > # We use pause in various places to allow text to be read > # before it scrolls off the screen > CONFIG_CMD_PAUSE=y > +CONFIG_CMD_POWEROFF=y > CONFIG_BOOT_RETRY=y > CONFIG_BOOT_RETRY_TIME=1 > CONFIG_BUTTON_REMAP_PHONE_KEYS=y > diff --git a/board/qualcomm/qcom-phone.env b/board/qualcomm/qcom-phone.env > index e91ae3ecdfbd..f9911340295f 100644 > --- a/board/qualcomm/qcom-phone.env > +++ b/board/qualcomm/qcom-phone.env > @@ -40,6 +40,7 @@ bootmenu_6=Dump clocks=clk dump; pause > bootmenu_7=Dump environment=printenv; pause > bootmenu_8=Board info=bdinfo; pause > bootmenu_9=Dump bootargs=fdt print /chosen bootargs; pause > +bootmenu_10=Power off=poweroff > > # Allow holding the volume down button while U-Boot loads to enter > # the boot menu > -- // Casey (she/her)
