From: Nagabhushana Netagunte <nagabhushana.netagu...@ti.com>
TX and RX channel numbers programmed as '1' during EMAC teardown initialization
is wrong. This patch fixes the same by setting channel number to '0' which is
used by U-boot.
Signed-off-by: Sugumar Natarajan <sugu...@ti.com>
Signed-off-by: Nagabhushana Netagunte <nagabhushana.netagu...@ti.com>
---
drivers/net/davinci_emac.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index 66c0d13..c0b8929 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -457,7 +457,7 @@ static void davinci_eth_ch_teardown(int ch)
if (ch == EMAC_CH_TX) {
/* Init TX channel teardown */
- writel(1, &adap_emac->TXTEARDOWN);
+ writel(0, &adap_emac->TXTEARDOWN);
do {
/*
* Wait here for Tx teardown completion interrupt to
@@ -476,7 +476,7 @@ static void davinci_eth_ch_teardown(int ch)
writel(0, &adap_emac->TX0HDP);
} else {
/* Init RX channel teardown */
- writel(1, &adap_emac->RXTEARDOWN);
+ writel(0, &adap_emac->RXTEARDOWN);
do {
/*
* Wait here for Rx teardown completion interrupt to
--
1.6.2.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
