Hi Torsten, I've set this version to Changes Requested to take into account Neil's review from v2.
Cheers, Peter On Mon, 18 May 2026 at 09:08, Neil Armstrong <[email protected]> wrote: > > On 5/16/26 13:39, Torsten Duwe wrote: > > Basic PCIe support for the RPi5. This is the prerequisite for PCIe > > slot adapters / HATs and NVMe storage. Those might require their own > > supporting drivers or changes. > > > > Changes from v2: > > - fix wrong subject prefixes > > - make reset drivers only found on the RPi5 depend on ARCH_BCM283X > > - some patches Reviewed-by Peter Robinson > > It seems you completely ignored by comments and review on v2: > https://lore.kernel.org/all/[email protected]/ > https://lore.kernel.org/all/[email protected]/#t > https://lore.kernel.org/all/[email protected]/ > https://lore.kernel.org/all/[email protected]/ > https://lore.kernel.org/all/[email protected]/ > > Thanks, > Neil > > > > Changes from v1: > > - fixed inbound window rewrite, which broke RPi4 > > - series Tested-by Pedro Falcato > > > > Andrea della Porta (1): > > pci: brcmstb: Fix PCIe bus numbers > > > > Torsten Duwe (8): > > ARM: bcm283x: Add bcm2712 PCIe memory window > > pci: brcmstb: Support different variants using a cfg struct > > reset: Add RPi5 brcmstb reset facilities > > reset: Add RPi5 rescal reset facilities > > pci: brcmstb: Get and use bridge and rescal reset properties > > pci: brcmstb: Fix iBAR size calculation > > pci: brcmstb: rework iBAR handling > > pci: brcmstb: Adapt to AXI bridge > > > > .../mach-bcm283x/include/mach/acpi/bcm2711.h | 7 +- > > arch/arm/mach-bcm283x/init.c | 10 +- > > configs/rpi_arm64_defconfig | 2 + > > drivers/pci/pcie_brcmstb.c | 391 ++++++++++++++++-- > > drivers/reset/Kconfig | 16 + > > drivers/reset/Makefile | 2 + > > drivers/reset/reset-brcmstb-rescal.c | 103 +++++ > > drivers/reset/reset-brcmstb.c | 97 +++++ > > 8 files changed, 590 insertions(+), 38 deletions(-) > > create mode 100644 drivers/reset/reset-brcmstb-rescal.c > > create mode 100644 drivers/reset/reset-brcmstb.c > > >
