From: Alexander Sverdlin <[email protected]> When commit 1d7993d1d0ef ("clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: v5.1.12)") introduced the parts of Linux Common Clock Framework, it was done for i.MX6 only and even had "depends on SPL_CLK_IMX6Q" conditions. Since commit ccab06689aa2 ("clk: imx: expose CCF entry for all") the framework can be reused with SoCs of other vendors (say, TI), but NXP SoC-specific code is still being build. It is especially problematic for size-constrained SPL images on TI AM62x.
Make the build of the i.MX/RTxxxx code not only dependent on CONFIG_$(PHASE_)CLK_CCF, but also on CONFIG_MACH_IMX options which shall cover the i.MX platform users. This saves 2264 bytes on 32-bit ARM platforms [using CCF]. Reviewed-by: Peng Fan <[email protected]> Signed-off-by: Alexander Sverdlin <[email protected]> --- Changelog: v3: - Fixed couple of typos v2: - CONFIG_MACH_IMX instead of (CONFIG_ARCH_MX6 | CONFIG_ARCH_IMXRT) v1: - https://lore.kernel.org/all/[email protected]/ drivers/clk/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 5f0c0d8a5c2..c37ef75d420 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -16,7 +16,7 @@ obj-$(CONFIG_$(PHASE_)CLK_STUB) += clk-stub.o obj-y += adi/ obj-y += airoha/ obj-y += analogbits/ -obj-y += imx/ +obj-$(CONFIG_MACH_IMX) += imx/ obj-$(CONFIG_CLK_JH7110) += starfive/ obj-y += tegra/ obj-y += ti/ -- 2.52.0
