On 6/2/26 09:19, Sam Day via B4 Relay wrote:
From: Sam Day <[email protected]>

If there's no PSCI implementation, then change the enable-method of all
CPUs from "psci" to "spin-table". Later, when spin_table_update_dt runs,
it will further patch the CPU nodes with the necessary cpu-release-addr.

This new fixup is only applied when CONFIG_ARMV8_SPIN_TABLE is enabled,
since that also determines whether spin_table_update_dt runs.

Signed-off-by: Sam Day <[email protected]>
---
  arch/arm/mach-snapdragon/board.c | 41 ++++++++++++++++++++++++++++++++++++++++
  1 file changed, 41 insertions(+)

diff --git a/arch/arm/mach-snapdragon/board.c b/arch/arm/mach-snapdragon/board.c
index 829a0109ac7..3b08069af98 100644
--- a/arch/arm/mach-snapdragon/board.c
+++ b/arch/arm/mach-snapdragon/board.c
@@ -183,7 +183,9 @@ static void show_psci_version(void)
  static void qcom_psci_fixup(void *fdt)
  {
        int offset, ret;
+       uint reg;
        struct arm_smccc_res res;
+       const char *prop;
arm_smccc_smc(ARM_PSCI_0_2_FN_PSCI_VERSION, 0, 0, 0, 0, 0, 0, 0, &res); @@ -198,6 +200,45 @@ static void qcom_psci_fixup(void *fdt)
        ret = fdt_del_node(fdt, offset);
        if (ret)
                log_err("Failed to delete /psci node: %d\n", ret);
+
+       if (!CONFIG_IS_ENABLED(ARMV8_SPIN_TABLE))
+               return;

Can this be dynamic ?

Neil

+
+       /* If spin-table support is enabled, make sure any CPU nodes with a
+        * PSCI enable-method are updated to spin-table. Further, any PSCI
+        * power-domains properties are removed.
+        */
+
+       offset = fdt_path_offset(fdt, "/cpus");
+       if (offset < 0)
+               return;
+
+       for (offset = fdt_first_subnode(fdt, offset);
+            offset >= 0;
+            offset = fdt_next_subnode(fdt, offset)) {
+               prop = fdt_getprop(fdt, offset, "device_type", NULL);
+               if (!prop || strcmp(prop, "cpu"))
+                       continue;
+
+               prop = fdt_getprop(fdt, offset, "enable-method", NULL);
+               if (!prop || strcmp(prop, "psci"))
+                       continue;
+
+               reg = fdtdec_get_uint(fdt, offset, "reg", 0);
+               ret = fdt_setprop_string(fdt, offset,
+                                        "enable-method", "spin-table");
+               if (ret)
+                       log_err("Failed to set CPU%d enable-method to 'spin-table', 
this CPU will not be available to booted OS! %d\n",
+                               reg, ret);
+
+               log_info("Patched CPU%d enable-method to 'spin-table'\n", reg);
+
+               prop = fdt_getprop(fdt, offset, "power-domain-names", NULL);
+               if (prop && !strcmp(prop, "psci")) {
+                       fdt_delprop(fdt, offset, "power-domains");
+                       fdt_delprop(fdt, offset, "power-domain-names");
+               }
+       }
  }
/* We support booting U-Boot with an internal DT when running as a first-stage bootloader


Reply via email to