Hi Varadarajan, On Thu, 4 Jun 2026 at 03:32, Varadarajan Narayanan <[email protected]> wrote: > > Add type definitions for Qualcomm's > > appsbl -> APPS Boot Loader (U-Boot) > config -> Board/DDR related configuration > lib -> Library of proprietary routines > > Signed-off-by: Varadarajan Narayanan <[email protected]> > --- > tools/binman/etype/qcom_appsbl.py | 18 ++++++++++++++++++ > tools/binman/etype/qcom_config.py | 21 +++++++++++++++++++++ > tools/binman/etype/qcom_lib.py | 21 +++++++++++++++++++++ > 3 files changed, 60 insertions(+) > create mode 100644 tools/binman/etype/qcom_appsbl.py > create mode 100644 tools/binman/etype/qcom_config.py > create mode 100644 tools/binman/etype/qcom_lib.py > > diff --git a/tools/binman/etype/qcom_appsbl.py > b/tools/binman/etype/qcom_appsbl.py > new file mode 100644 > index 00000000000..e308ebd2fca > --- /dev/null > +++ b/tools/binman/etype/qcom_appsbl.py > @@ -0,0 +1,18 @@ > +# SPDX-License-Identifier: GPL-2.0 > +# Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. > +# > +# Entry-type module for U-Boot MBN image > +# > + > +from binman.etype.blob_named_by_arg import Entry_blob_named_by_arg > + > +class Entry_qcom_appsbl(Entry_blob_named_by_arg): > + """U-Boot mbn image > + > + Properties / Entry arguments: > + - filename: Filename of u-boot MBN (default 'u-boot.mbn')
U-Boot (not u-boot) > + > + This is the U-Boot MBN image. It is good to have this etype, but please document it properly. We need to know what MBN stands for, along with a link to the spec, etc. Also please describe its role in booting. Please do the same for the others below too. > + """ > + def __init__(self, section, etype, node): > + super().__init__(section, etype, node, 'qcom-appsbl') > diff --git a/tools/binman/etype/qcom_config.py > b/tools/binman/etype/qcom_config.py > new file mode 100644 > index 00000000000..a1787c97b34 > --- /dev/null > +++ b/tools/binman/etype/qcom_config.py > @@ -0,0 +1,21 @@ > +# SPDX-License-Identifier: GPL-2.0 > +# Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. > +# > +# Entry-type module for QC Config ELF > +# > + > +from binman.entry import Entry > +from binman.etype.blob_named_by_arg import Entry_blob_named_by_arg > + > +class Entry_qcom_config(Entry_blob_named_by_arg): > + """QC Config ELF Does QC Config mean Qualcomm Config? Is this a configuration file? If so, why is it in elf format? > + > + Properties / Entry arguments: > + - qcom-config-path: Filename of QC Config ELF (typically > 'qcconfig.elf') > + > + This will be part of the Qualcomm SPL based bootloader image > + > + """ > + def __init__(self, section, etype, node): > + super().__init__(section, etype, node, 'qcom-config') > + self.external = True > diff --git a/tools/binman/etype/qcom_lib.py b/tools/binman/etype/qcom_lib.py > new file mode 100644 > index 00000000000..ca7666fe6e6 > --- /dev/null > +++ b/tools/binman/etype/qcom_lib.py > @@ -0,0 +1,21 @@ > +# SPDX-License-Identifier: GPL-2.0 > +# Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. > +# > +# Entry-type module for QC LIB ELF > +# > + > +from binman.entry import Entry > +from binman.etype.blob_named_by_arg import Entry_blob_named_by_arg > + > +class Entry_qcom_lib(Entry_blob_named_by_arg): > + """QC LIB ELF > + > + Properties / Entry arguments: > + - qcom-lib-path: Filename of QC LIB ELF (typically 'QCLib.elf') > + > + This will be part of the Qualcomm SPL based bootloader image > + > + """ > + def __init__(self, section, etype, node): > + super().__init__(section, etype, node, 'qcom-lib') > + self.external = True > -- > 2.34.1 > Regards, Simon
