Hi, On 06/09/2011 11:07 AM, Heiko Schocher wrote: > The U-Boot Design Principles[1] clearly say: > > Initialize devices only when they are needed within U-Boot, i.e. don't > initialize the Ethernet interface(s) unless U-Boot performs a download > over Ethernet; don't initialize any IDE or USB devices unless U-Boot > actually tries to load files from these, etc. (and don't forget to > shut down these devices after using them - otherwise nasty things may > happen when you try to boot your OS). > > So, do not initialize and read the sensors on startup. > > Signed-off-by: Heiko Schocher <[email protected]> > cc: Wolfgang Denk <[email protected]> > cc: Holger Brunck <[email protected]> > > ---
what's the status of this patch? Is it intended to go in for rc1? I have seen that 1/2 was committed but not this one. This patch runs in our local branch for some month so: Tested-by: Holger Brunck <[email protected]> Regards Holger _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
