Move the board environment from CFG_EXTRA_ENV_SETTINGS in the config header to board/nxp/mx6ullevk/mx6ullevk.env for better maintainability. The file is named after CONFIG_SYS_BOARD so it is selected automatically without setting CONFIG_ENV_SOURCE_FILE. Drop the now unused linux/stringify.h include.
The generated default environment is unchanged. This was verified by comparing the output of scripts/get_default_envs.sh before and after the change, which produced identical results. Signed-off-by: Aristo Chen <[email protected]> --- board/nxp/mx6ullevk/mx6ullevk.env | 69 +++++++++++++++++++++++++++++ include/configs/mx6ullevk.h | 73 ------------------------------- 2 files changed, 69 insertions(+), 73 deletions(-) create mode 100644 board/nxp/mx6ullevk/mx6ullevk.env diff --git a/board/nxp/mx6ullevk/mx6ullevk.env b/board/nxp/mx6ullevk/mx6ullevk.env new file mode 100644 index 00000000000..0fce3aaaa4e --- /dev/null +++ b/board/nxp/mx6ullevk/mx6ullevk.env @@ -0,0 +1,69 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ + +script=boot.scr +image=zImage +console=ttymxc0 +initrd_high=0xffffffff +fdt_file=undefined +fdt_addr=0x83000000 +boot_fdt=try +ip_dyn=yes +videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0 +mmcdev=CONFIG_ENV_MMC_DEVICE_INDEX +mmcpart=1 +mmcroot=/dev/mmcblk1p2 rootwait rw +mmcautodetect=yes +mmcargs=setenv bootargs console=${console},${baudrate} root=${mmcroot} +loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script}; +bootscript=echo Running bootscript from mmc ...; source +loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image} +loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file} +mmcboot=echo Booting from mmc ...; + run mmcargs; + if test ${boot_fdt} = yes || test ${boot_fdt} = try; then + if run loadfdt; then + bootz ${loadaddr} - ${fdt_addr}; + else + if test ${boot_fdt} = try; then + bootz; + else + echo WARN: Cannot load the DT; + fi; + fi; + else + bootz; + fi; +findfdt=if test $fdt_file = undefined; then + if test $board_name = ULZ-EVK && test $board_rev = 14X14; then + setenv fdt_file imx6ulz-14x14-evk.dtb; + fi; + if test $board_name = EVK && test $board_rev = 14X14; then + setenv fdt_file imx6ull-14x14-evk.dtb; + fi; + if test $fdt_file = undefined; then + echo WARNING: Could not determine dtb to use; + fi; + fi; +netargs=setenv bootargs console=${console},${baudrate} root=/dev/nfs + ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp +netboot=echo Booting from net ...; + run netargs; + if test ${ip_dyn} = yes; then + setenv get_cmd dhcp; + else + setenv get_cmd tftp; + fi; + ${get_cmd} ${image}; + if test ${boot_fdt} = yes || test ${boot_fdt} = try; then + if ${get_cmd} ${fdt_addr} ${fdt_file}; then + bootz ${loadaddr} - ${fdt_addr}; + else + if test ${boot_fdt} = try; then + bootz; + else + echo WARN: Cannot load the DT; + fi; + fi; + else + bootz; + fi; diff --git a/include/configs/mx6ullevk.h b/include/configs/mx6ullevk.h index 88b535e1bd0..a535163fd19 100644 --- a/include/configs/mx6ullevk.h +++ b/include/configs/mx6ullevk.h @@ -9,7 +9,6 @@ #include <asm/arch/imx-regs.h> #include <linux/sizes.h> -#include <linux/stringify.h> #include "mx6_common.h" #include <asm/mach-imx/gpio.h> @@ -23,78 +22,6 @@ #define CFG_SYS_FSL_USDHC_NUM 2 #endif -#define CFG_EXTRA_ENV_SETTINGS \ - "script=boot.scr\0" \ - "image=zImage\0" \ - "console=ttymxc0\0" \ - "initrd_high=0xffffffff\0" \ - "fdt_file=undefined\0" \ - "fdt_addr=0x83000000\0" \ - "boot_fdt=try\0" \ - "ip_dyn=yes\0" \ - "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \ - "mmcdev="__stringify(CONFIG_ENV_MMC_DEVICE_INDEX)"\0" \ - "mmcpart=1\0" \ - "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \ - "mmcautodetect=yes\0" \ - "mmcargs=setenv bootargs console=${console},${baudrate} " \ - "root=${mmcroot}\0" \ - "loadbootscript=" \ - "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ - "bootscript=echo Running bootscript from mmc ...; " \ - "source\0" \ - "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ - "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ - "if run loadfdt; then " \ - "bootz ${loadaddr} - ${fdt_addr}; " \ - "else " \ - "if test ${boot_fdt} = try; then " \ - "bootz; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi; " \ - "fi; " \ - "else " \ - "bootz; " \ - "fi;\0" \ - "findfdt="\ - "if test $fdt_file = undefined; then " \ - "if test $board_name = ULZ-EVK && test $board_rev = 14X14; then " \ - "setenv fdt_file imx6ulz-14x14-evk.dtb; fi; " \ - "if test $board_name = EVK && test $board_rev = 14X14; then " \ - "setenv fdt_file imx6ull-14x14-evk.dtb; fi; " \ - "if test $fdt_file = undefined; then " \ - "echo WARNING: Could not determine dtb to use; " \ - "fi; " \ - "fi;\0" \ - "netargs=setenv bootargs console=${console},${baudrate} " \ - "root=/dev/nfs " \ - "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ - "netboot=echo Booting from net ...; " \ - "run netargs; " \ - "if test ${ip_dyn} = yes; then " \ - "setenv get_cmd dhcp; " \ - "else " \ - "setenv get_cmd tftp; " \ - "fi; " \ - "${get_cmd} ${image}; " \ - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ - "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ - "bootz ${loadaddr} - ${fdt_addr}; " \ - "else " \ - "if test ${boot_fdt} = try; then " \ - "bootz; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi; " \ - "fi; " \ - "else " \ - "bootz; " \ - "fi;\0" \ - /* Miscellaneous configurable options */ /* Physical Memory Map */ -- 2.43.0
