Introduce a defconfig for Shikra based boards. Signed-off-by: Aswin Murugan <[email protected]> --- configs/qcom_shikra_defconfig | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 configs/qcom_shikra_defconfig
diff --git a/configs/qcom_shikra_defconfig b/configs/qcom_shikra_defconfig new file mode 100644 index 00000000000..d1f00294466 --- /dev/null +++ b/configs/qcom_shikra_defconfig @@ -0,0 +1,29 @@ +# Configuration for building U-Boot to be flashed +# to the uefi partition of QCS615 dev boards with +# the "Linux Embedded" partition layout (which have +# a dedicated "uefi" partition for edk2/U-Boot) + +#include "qcom_defconfig" + +# Otherwise buildman thinks this isn't an ARM platform +CONFIG_ARM=y + +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_DEBUG_UART_BASE=0x4a80000 +CONFIG_DEBUG_UART_MSM_GENI=y +CONFIG_DEBUG_UART_CLOCK=14745600 + +CONFIG_DEFAULT_DEVICE_TREE="shikra-cqs-evk" + +CONFIG_FASTBOOT_BUF_ADDR=0xB5000000 + +# CONFIG_OF_UPSTREAM is not set + +CONFIG_REMAKE_ELF=y + +# CONFIG_SCSI is not set + +# Address where U-Boot will be loaded +CONFIG_TEXT_BASE=0x9f800000 + -- 2.34.1
