On Wed, Jun 24, 2026 at 04:25:02PM +0530, Balaji Selvanathan wrote: > Hi Manivannan, Casey, > > On 6/19/2026 1:04 PM, Manivannan Sadhasivam wrote: > > qcom_defconfig uses EMMC as the flash interface for Fasboot, but QCS6490 > > RB3Gen2 has no on-board eMMC. So override the config to use UFS as the > > flash medium by selecting 'scsi' interface. > > > > This enables flashing the images over Fastboot on this board. > > > > Signed-off-by: Manivannan Sadhasivam > > <[email protected]> > > --- > > configs/qcm6490_defconfig | 4 ++++ > > 1 file changed, 4 insertions(+) > > > > diff --git a/configs/qcm6490_defconfig b/configs/qcm6490_defconfig > > index b088367f86c..d599e7611c1 100644 > > --- a/configs/qcm6490_defconfig > > +++ b/configs/qcm6490_defconfig > > @@ -16,3 +16,7 @@ CONFIG_DEFAULT_DEVICE_TREE="qcom/qcs6490-rb3gen2" > > CONFIG_FASTBOOT_BUF_ADDR=0xd8800000 > > CONFIG_PHY_QCOM_QMP_COMBO=y > > + > > +CONFIG_FASTBOOT_FLASH_BLOCK=y > > +CONFIG_FASTBOOT_FLASH_BLOCK_INTERFACE_NAME="scsi" > > +CONFIG_FASTBOOT_FLASH_BLOCK_DEVICE_ID=0 > > Similar patch is submitted and under review: > https://lore.kernel.org/u-boot/[email protected]/ > > <https://lore.kernel.org/u-boot/[email protected]/> > > Since most of the Dragonwing boards has UFS as default, we wanted to change > default to UFS in qcom_defconfig itself and then for eMMC boards, we can > modify in their board specific defconfigs. >
I don't have any issues. It is upto Casey to decide. - Mani -- மணிவண்ணன் சதாசிவம்
