On 6/10/26 07:36, Badhrinath S wrote:
Add default configuration for the IPQ9650 RDP488 board with eMMC boot support.
Do we need individual defconfigs for every single IPQ board really? One or two sure but at this point I think we ought to have a common fragment that they include with the base stuff so we can keep things in sync and differentiate the platform specific options.
Signed-off-by: Badhrinath S <[email protected]> --- Changes in v2: - No changes configs/qcom_ipq9650_mmc_defconfig | 57 ++++++++++++++++++++++++++++++ 1 file changed, 57 insertions(+) create mode 100644 configs/qcom_ipq9650_mmc_defconfig diff --git a/configs/qcom_ipq9650_mmc_defconfig b/configs/qcom_ipq9650_mmc_defconfig new file mode 100644 index 000000000000..ce2488d72eb1 --- /dev/null +++ b/configs/qcom_ipq9650_mmc_defconfig @@ -0,0 +1,57 @@ +CONFIG_ARM=y +CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_POSITION_INDEPENDENT=y +CONFIG_SYS_INIT_SP_BSS_OFFSET=0x180000 +CONFIG_ARCH_SNAPDRAGON=y +CONFIG_TEXT_BASE=0x8a280000 +CONFIG_NR_DRAM_BANKS=24 +CONFIG_ENV_SIZE=0x40000 +CONFIG_ENV_OFFSET=0 +CONFIG_DEFAULT_DEVICE_TREE="qcom/ipq9650-rdp488" +CONFIG_SYS_LOAD_ADDR=0x90000000 +CONFIG_DEBUG_UART_BASE=0x1a98000 +CONFIG_DEBUG_UART_CLOCK=14745600 +CONFIG_DEBUG_UART=y +CONFIG_REMAKE_ELF=y +# CONFIG_EFI_LOADER is not set +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +# CONFIG_BOOTSTD is not set +CONFIG_OF_BOARD_SETUP=y +CONFIG_USE_PREBOOT=y +CONFIG_SYS_PBSIZE=1024 +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PART=y +CONFIG_OF_LIVE=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_CLK=y +CONFIG_CLK_QCOM_IPQ9650=y +CONFIG_MSM_GPIO=y +# CONFIG_I2C is not set +# CONFIG_INPUT is not set +CONFIG_MISC=y +CONFIG_QCOM_GENI=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_ADMA=y +CONFIG_MMC_SDHCI_MSM=y +CONFIG_MTD=y +CONFIG_DM_MDIO=y +CONFIG_DM_ETH_PHY=y +CONFIG_DWC_ETH_QOS=y +CONFIG_DWC_ETH_QOS_QCOM=y +CONFIG_RGMII=y +CONFIG_PHY=y +CONFIG_PHY_QCOM_QMP_UFS=y +CONFIG_PHY_QCOM_QUSB2=y +CONFIG_PINCTRL=y +CONFIG_PINCONF=y +CONFIG_PINCTRL_QCOM_IPQ9650=y +CONFIG_DEBUG_UART_MSM_GENI=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_MSM_SERIAL=y +CONFIG_MSM_GENI_SERIAL=y +CONFIG_SOC_QCOM=y +CONFIG_SYS_MALLOC_LEN=0xC0000
