On Mon, Sep 5, 2011 at 6:25 AM, Sanjeev Premi <[email protected]> wrote: > This patch fixes the warning dure to recent changes to the board > configuration: > cmd_i2c.o cmd_i2c.c -c > cmd_i2c.c:109:1: warning: missing braces around initializer > cmd_i2c.c:109:1: warning: (near initialization for 'i2c_no_probes[0]') > > Signed-off-by: Sanjeev Premi <[email protected]> > Cc: Jason Kridner <[email protected]>
Acked-by: Jason Kridner <[email protected]> I confirmed that this fixes the above warning and builds and operates properly. As far as other platforms needing this type of patch, it seems there is a challenge in speaking for all of them, so I hope this patch can be applied. > --- > > Patch was compile tested against the latest u-boot-arm.git at: > 58c583b : net: Check network device driver name > > include/configs/omap3_beagle.h | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h > index 18c6deb..a891246 100644 > --- a/include/configs/omap3_beagle.h > +++ b/include/configs/omap3_beagle.h > @@ -118,7 +118,7 @@ > #define CONFIG_I2C_MULTI_BUS 1 > > /* Probe all devices */ > -#define CONFIG_SYS_I2C_NOPROBES {0x0, 0x0} > +#define CONFIG_SYS_I2C_NOPROBES {{0x0, 0x0}} > > /* USB */ > #define CONFIG_MUSB_UDC 1 > -- > 1.7.2.2 > > _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
