[This didn't go to the list due to "too many recipients" so I'm sending it again]
Hi, Here are some problems I see currently with the today's mainline U-boot not seen with v2011.06 Just sharing them here. HEAD: 05f64ae996a51e32ef47e0db2c806e704606606e: led: remove camel casing of led identifiers globally **** MMC Timeouts I see this quite often but not always: U-Boot 2011.06-rc3-03337-g4f7eb7e-dirty (Jun 27 2011 - 15:26:00) OMAP3630/3730-GP ES2.1, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz OMAP3 Beagle board + LPDDR/NAND I2C: ready DRAM: 512 MiB NAND: 0 MiB MMC: OMAP SD/MMC: 0 *** Warning - readenv() failed, using default environment In: serial Out: serial Err: serial Beagle xM Rev C No EEPROM on expansion board Die ID #72f000029ff80000016071640e02a008 Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2 SD/MMC found on device 0 mmc_send_cmd: timedout waiting for cmddis! ** Can't read from device 0 ** Increasing MAX_RETRY_MS to 5000 fixes these errors, but there is quite a pause before the fatload of uEnv.txt takes place. I didn't notice any recent changes to the generic MMC driver. Beagle already uses generic MMC driver and didn't need to switch over unlike other platforms. **** SMSC USB device is not detected in scan OMAP3 beagleboard.org # usb start (Re)start USB... USB: Register 1313 NbrPorts 3 USB EHCI 1.00 scanning bus for devices... EHCI timed out on TD - token=0x80008c80 2 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found scanning bus for ethernet devices... 0 Ethernet Device(s) found OMAP3 beagleboard.org # Because of this, I can't tftp on the beagle. Thanks, Joel _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
